NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
myVolts
Tests ATX, BTX and ITX power supplies via 20/24-pin, P4, P6, P8, SATA and floppy connectors with LCD voltage readouts and audible alerts
The myVolts power supply tester checks ATX BTX and ITX compliant units with a built-in LCD that displays voltage status. It is designed for hobbyists who want a quick functional check and for trade professionals who need a rapid diagnostic tool. The compact black plastic body measures about 12 by 6.5 by 1.5 centimetres. No external power source is required because the tester draws supply from the unit under test.
Verify that the power supply you intend to test provides a 20 or 24 pin ATX connector plus the necessary 4 pin P4 6 pin PCI-Express or 8 pin dual-CPU plugs. The tester also accepts floppy HDD CDROM and SATA peripheral connectors for load testing. If your power supply lacks any of these interfaces the corresponding voltage rails cannot be evaluated. Ensure the power supply is disconnected from the motherboard before plugging it into the tester.
The LCD shows real-time readings for plus 12V minus 12V plus 5V minus 5V plus 3.3V plus 5V standby and the 12V power good signal. A short beep at power-on indicates normal output while a continuous buzzer sounds when a voltage is missing or outside limits. The corresponding voltage value or PG indicator will also flicker on the screen. This immediate feedback lets you confirm a healthy supply or identify a failed rail without additional instruments.
| Type | AT |
|---|
The package contains only the tester unit itself. All required connectors — 20/24-pin ATX, 4-pin P4, 8-pin dual-CPU, 6-pin PCIe, SATA, floppy and HDD/CDROM — are built into the device, so no extra cables are needed.
This is a single model that covers ATX, BTX and ITX power supplies. For a current ATX system you simply plug the 24-pin and 4-pin or 8-pin CPU connectors into the matching jacks on the same unit.
The display shows real-time voltage levels for each rail. If a rail is missing or outside normal tolerance the tester sounds a continuous buzzer and the corresponding voltage value or PG indicator flashes, signalling a faulty supply.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?