Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green DDR5 RDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 CL40 2Rx4 1.1V ECC Registered RDIMM memory upgrade for Supermicro H13SVW-N

SKU CH-P27E-K9HVH

128 GB DDR5 4800 CL40 2Rx4 1.1 V ECC registered RDIMM validated for the Supermicro H13SVW-N motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

Prikaži še 12 konfiguracij

Speed 4800MHz

  • Exact-match DDR5-4800 CL40 2Rx4 ECC RDIMM recognised at full 128GB capacity and rated speed
  • Verified fit for Supermicro H13SVW-N using required 288-pin registered form factor
  • Enterprise stability from registered architecture offloading controller plus ECC correcting single-bit errors on the fly
  • Check your server manual for supported capacities, DIMM population order and installation steps before purchase
  • Lifetime replacement warranty with free US-based technical support included

Exact-match server upgrade

This 128GB DDR5-4800 module is built as a direct drop-in for the Supermicro H13SVW-N motherboard. It uses the registered RDIMM form factor, 2Rx4 rank structure and 1.1V operation that the board's memory controller expects.

Enterprise stability focus

Buyers who need registered ECC memory for fully populated servers will find the correct specifications here. Those requiring unbuffered UDIMMs, SODIMMs, or non-ECC modules for workstations should look at a different product line.

Single-module kit contents

The package delivers one 288-pin DDR5 RDIMM rated at PC5-38400 with CL40 latency. No heat spreader, additional cables or software utilities are included, so installation depends entirely on the motherboard's documented population rules.

Poudarki

  • Exact-match DDR5-4800 CL40 2Rx4 ECC RDIMM recognised at full 128GB capacity and rated speed
  • Verified fit for Supermicro H13SVW-N using required 288-pin registered form factor
  • Enterprise stability from registered architecture offloading controller plus ECC correcting single-bit errors on the fly
  • Check your server manual for supported capacities, DIMM population order and installation steps before purchase
  • Lifetime replacement warranty with free US-based technical support included

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Does my Supermicro H13SVW-N motherboard need to support 2Rx4 registered ECC DDR5 at 1.1V for this 128GB module to work?

Yes, the H13SVW-N must accept 288-pin RDIMMs with 2Rx4 organisation, 1.1V operation and registered ECC; the module matches those exact specifications so the board will recognise the full 128GB capacity at DDR5-4800 CL40.

Can I mix this 128GB DDR5-4800 CL40 RDIMM with slower DDR5 modules already installed in my H13SVW-N?

The motherboard will down-clock all populated slots to the speed of the slowest module, so existing slower DDR5 will force this kit to run below its rated 4800 MT/s and may require looser timings than CL40.

How can I verify the module is running at DDR5-4800 with CL40 and ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory frequency shows 4800 MT/s, CAS latency reads 40, voltage reports 1.1V and ECC status is enabled for the installed 128GB RDIMM.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.