BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277467BTC
Na zalogi
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 UDIMM memory upgrade for ASUS P11C-I/NGFF2280
A 16 GB DDR4 2666 CL19 dual-channel kit built for the ASUS P11C-I/NGFF2280 motherboard
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit expands system memory for multitasking
- DDR4 2666 speed matches motherboard specification for stable operation
- CL19 latency at 1.20 V balances responsiveness with low power draw
- 288-pin UDIMM form factor fits the ASUS P11C-I/NGFF2280 slot directly
- Major OEM Samsung Micron Hynix chips deliver tested reliability
System-specific DDR4 kit for ASUS P11C-I
This NEMIX RAM kit delivers 16 GB as two 8 GB DDR4 2666 UDIMM modules built for the ASUS P11C-I/NGFF2280 mini-ITX server board. It runs at 1.2 V with CL19 latency and uses unbuffered non-ECC chips from major OEM suppliers. The 288-pin DIMMs target administrators who need a validated upgrade for this exact platform.
Replaces slower or smaller DDR4 on the same board
Moving from a single 8 GB stick or lower-frequency modules to this matched pair enables dual-channel throughput at the board's native 2666 MT/s. The jump is worth it when the workload hits memory capacity limits or when single-channel bandwidth becomes a bottleneck. Buyers who need ECC protection or registered DIMMs cannot use this kit.
Straightforward DIMM installation
The modules slot into the board's two UDIMM sockets without tools and require no heat spreader clearance. The main issue occurs when the BIOS defaults to a lower speed; enabling the correct 2666 MT/s profile or setting voltage to 1.2 V manually usually resolves it. Mixing these sticks with different ranks or voltages often prevents the system from posting.
Poudarki
- 16 GB dual-channel kit expands system memory for multitasking
- DDR4 2666 speed matches motherboard specification for stable operation
- CL19 latency at 1.20 V balances responsiveness with low power draw
- 288-pin UDIMM form factor fits the ASUS P11C-I/NGFF2280 slot directly
- Major OEM Samsung Micron Hynix chips deliver tested reliability
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Server Motherboard Compatible Series Memory |
| Model | ASUS DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT |
Vprašanja o tem izdelku
Will the 288-pin UDIMM modules fit the ASUS P11C-I/NGFF2280 motherboard?
Yes, the kit is built for that board and uses the standard 288-pin DDR4 UDIMM form factor it requires.
What is the correct way to seat the two 8 GB sticks so the system recognises 16 GB?
Insert each module until the side clips click; populate the two slots the manual specifies for dual-channel operation.
When should I expect to replace these CL19 1.2 V modules?
They carry a lifetime replacement warranty and have no moving parts, so replacement is only needed if a fault appears.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
