BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277188BTC
Na zalogi
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 ECC RDIMM CL22 1Rx4 Gigabyte MZ01-CE1 EPYC memory upgrade
16 GB DDR4 3200 ECC registered DIMM with CL22 latency for Gigabyte MZ01-CE1 EPYC motherboards
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection guards data integrity on critical workloads
- Registered design stabilises signal for dense server configurations
- 3200 MT/s throughput matches EPYC platform specifications
- 2 V operation reduces power draw per module
- Single-rank 1Rx4 layout optimises memory-channel efficiency
16GB DDR4 3200 ECC RDIMM for Gigabyte MZ01-CE1
This 16GB DDR4 3200 module is built as a registered ECC RDIMM for the Gigabyte MZ01-CE1 AMD EPYC motherboard. It operates at 1.2V with CL22 timing and uses a 1Rx4 organisation on 288 pins.
Suited for EPYC server upgrades needing registered
IT teams expanding memory on the validated Gigabyte MZ01-CE1 platform will find this module a direct fit. Builders requiring unbuffered DIMMs, non-ECC memory, or higher speeds than 3200MT/s should look at other options.
Single 16GB rank at 3200MT/s with CL22 latency
The 1Rx4 layout provides one 16GB rank per module, giving straightforward capacity scaling in compatible slots. Workloads demanding multiple ranks per DIMM, lower CAS latency, or speeds beyond PC4-25600 will exceed what this module delivers.
Poudarki
- ECC protection guards data integrity on critical workloads
- Registered design stabilises signal for dense server configurations
- 3200 MT/s throughput matches EPYC platform specifications
- 2 V operation reduces power draw per module
- Single-rank 1Rx4 layout optimises memory-channel efficiency
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | Gigabyte Server Motherboard Compatible Series Memory |
| Model | Gigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-614K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Gigabyte |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Vprašanja o tem izdelku
Does this DDR4 3200 ECC RDIMM require a Gigabyte MZ01-CE1 motherboard with AMD EPYC CPU to function?
Yes, this module is validated for the Gigabyte MZ01-CE1 motherboard running AMD EPYC processors and will not operate in consumer platforms lacking registered ECC support.
Can I mix this CL22 1Rx4 registered stick with existing unbuffered DDR4 memory in the same server?
No, registered ECC RDIMMs cannot be mixed with unbuffered UDIMMs; the memory controller requires all slots to use registered modules for stable operation.
How do I verify the 16GB DDR4 3200 module is running at PC4-25600 speed after installation?
Enter the system BIOS or use a hardware utility such as dmidecode to confirm the reported speed shows 3200 MT/s and the CAS latency reads CL22.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
