Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 ECC Registered RDIMM 1Rx8 CL40 1.1V Supermicro H14SSF memory upgrade

SKU CH-1HKW-617CY

16 GB DDR5 4800 ECC registered RDIMM, CL40 at 1.1 V, validated for Supermicro H14SSF

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

Prikaži še 24 konfiguracij
  • Exact-match DDR5-4800 spec ensures full-speed recognition
  • Registered ECC architecture prevents silent data corruption
  • 1Rx8 single-rank design allows full-slot population
  • 1 V operation matches motherboard voltage requirements
  • Validated for Supermicro H14SSF motherboard compatibility

Exact-match DDR5 RDIMM for Supermicro H14SSF

This 16 GB DDR5 4800 module is built as a registered ECC RDIMM with 1Rx8 organisation, CL40 timing and 1.1 V operation. It matches the Supermicro H14SSF memory-controller requirements so the server recognises the full capacity at rated speed without manual tuning. The 288-pin form factor fits only boards that call for registered DDR5 DIMMs.

Thermals power and noise

The module has no heat spreader and draws 1.10 V at the standard DDR5 voltage, keeping power draw low in typical server workloads. Registered buffering reduces electrical load on the memory controller, which helps system fans maintain steady speeds even with all slots populated. Passive operation means the DIMM itself adds no audible noise to the chassis.

What the bundle changes

The single-DIMM kit delivers exactly one 16 GB registered ECC module, letting you add capacity in the precise increments your motherboard population rules allow. ECC corrects single-bit errors on the fly, preventing silent data corruption that could otherwise crash production services. Lifetime replacement coverage and US-based technical support back the upgrade for the service life of the server.

Poudarki

  • Exact-match DDR5-4800 spec ensures full-speed recognition
  • Registered ECC architecture prevents silent data corruption
  • 1Rx8 single-rank design allows full-slot population
  • 1 V operation matches motherboard voltage requirements
  • Validated for Supermicro H14SSF motherboard compatibility

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How do I install the 288-pin DDR5 RDIMM in the Supermicro H14SSF, and which step is often missed?

Align the key notch on the 288-pin DDR5 RDIMM with the slot, press firmly until both latches click, then verify the module is recognised at 4800 MT/s in BIOS; the step often missed is confirming the motherboard's required population order for 1Rx8 registered DIMMs before powering on.

What maintenance or replacement will the 16GB DDR5 4800 ECC Registered RDIMM need over its service life?

The module has no heat spreader and no moving parts, so no routine maintenance is required; ECC corrects single-bit errors automatically, and replacement is only needed if a DIMM fails or capacity must be increased beyond the board's supported configuration.

What limit appears first when the 1Rx8 CL40 1.1V RDIMM runs sustained workloads on the H14SSF?

The registered buffer and ECC logic keep signal integrity stable, so the first limit is the memory controller's maximum supported capacity per channel or total system capacity as defined in the Supermicro H14SSF manual, not thermal throttling or voltage drift.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.