SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00497892BTC
Na zalogi
NEMIX RAM
NEMIX RAM 192GB (2x96GB) DDR5 6400MHz CL52 1.1V ECC RDIMM memory upgrade for Supermicro SYS-122HA-TN-LCC
Registered ECC DDR5 RDIMM kit supplying 192 GB across two 96 GB modules at 6400 MHz CL52 for the Supermicro SYS-122HA-TN-LCC
- Capacity192GB (2 x 96GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 192 GB capacity expands server memory headroom
- ECC RDIMM design protects data integrity in critical workloads
- 6400 MHz DDR5 speed accelerates throughput for demanding applications
- 2Rx4 registered architecture enables high-density 96 GB modules
- 1 V operation reduces power draw per gigabyte
192GB DDR5 ECC RDIMM kit for Supermicro
This NEMIX RAM kit supplies 192GB of DDR5 registered ECC memory across two 96GB modules. It is built for the Supermicro SYS-122HA-TN-LCC server platform where registered DIMMs and error correction are required. Each module runs at 1.1V with a CL52 latency rating. The 288-pin form factor matches the DDR5 RDIMM slots on that system.
Sustained operation at 6400MHz
The modules operate at the PC5-51200 data rate continuously, using a 2Rx4 rank configuration that distributes load across the memory controller. Registered buffering reduces electrical stress on the motherboard during extended workloads. ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute runs. The 1.1V supply voltage keeps power draw stable under constant utilisation.
DDR5 RDIMM constraints for registered server
Only motherboards wired for 288-pin DDR5 RDIMMs with registered control lines can accept this kit. Systems that require unbuffered UDIMMs or earlier DDR generations will not post with these modules installed. The 2Rx4 density demands a memory controller qualified for dual-rank x4 chips; boards limited to single-rank or x8 organisation cannot use the full capacity. Buyers needing higher capacity per slot or unbuffered memory must select a different module type.
Poudarki
- 192 GB capacity expands server memory headroom
- ECC RDIMM design protects data integrity in critical workloads
- 6400 MHz DDR5 speed accelerates throughput for demanding applications
- 2Rx4 registered architecture enables high-density 96 GB modules
- 1 V operation reduces power draw per gigabyte
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB (2 x 96GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vprašanja o tem izdelku
How much power does the 1.10V DDR5 RDIMM kit draw when the Supermicro SYS-122HA-TN-LCC runs all day?
Each 96GB module operates at 1.10V DDR5 standard voltage; total system draw depends on the server's memory controller and workload, not the kit alone.
What must the Supermicro SYS-122HA-TN-LCC already support to use this 288-pin ECC RDIMM kit?
The motherboard must provide DDR5 RDIMM slots, registered ECC support, and a BIOS that recognises 2Rx4 96GB density at 6400MHz CL52.
Will the CL52 6400MHz kit run stably alongside any existing DDR5 RDIMMs already installed in the SYS-122HA-TN-LCC?
Mixing kits forces all modules to the slowest common speed and loosest timings; matching rank, voltage and ECC type avoids training failures.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
