BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278333BTC
Na zalogi
NEMIX RAM
NEMIX RAM 1TB (16x64GB) DDR5 5600 CL46 288-Pin ECC RDIMM Kit for Dell PowerEdge XE9780L/XE9785L memory upgrade
A 1 TB DDR5 ECC RDIMM kit with sixteen 64 GB modules at 5600 MT/s CL46 for Dell PowerEdge XE9780L and XE9785L servers
- Capacity1TB (16 x 64GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Massive 1 TB capacity with sixteen 64 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- ECC registered design protects data integrity in servers
- Low 1.10 V operation reduces power draw per module
- Validated for Dell PowerEdge XE9780L and XE9785L systems
Dell PowerEdge XE9780L/XE9785L memory kit
This NEMIX RAM kit supplies 1TB of DDR5 registered ECC memory across sixteen 64GB modules. It is built for Dell PowerEdge XE9780L and XE9785L rack servers that require 288-pin RDIMMs. The modules operate at 1.1V with a CAS latency of CL46.
Sustained load behaviour
Registered buffering and on-die ECC keep data integrity intact during continuous server workloads. The 4Rx4 organisation spreads access across four ranks per module, helping the memory controller maintain throughput under heavy multi-threaded demand. DDR5 architecture provides two independent sub-channels per module for better concurrency.
Deciding specification
The kit is validated only for Dell PowerEdge XE9780L and XE9785L systems; other platforms may not recognise the 4Rx4 registered modules or the specific SPD profile. Buyers with different server models should verify qualification before purchasing.
Poudarki
- Massive 1 TB capacity with sixteen 64 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- ECC registered design protects data integrity in servers
- Low 1.10 V operation reduces power draw per module
- Validated for Dell PowerEdge XE9780L and XE9785L systems
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-944K16 |
| Capacity | 1TB (16 x 64GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB (16 x 64GB) DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vprašanja o tem izdelku
How much power does the 1.1 V DDR5 5600 kit draw when the server runs continuously?
Each module operates at 1.1 V; total draw depends on the Dell PowerEdge XE9780L or XE9785L platform and workload, not on the kit alone.
What must the Dell PowerEdge XE9780L or XE9785L already have to accept this 16 x 64 GB RDIMM kit?
The server needs 16 free 288-pin DDR5 RDIMM slots and a BIOS that supports 4Rx4 registered ECC modules at 5600 MT/s.
Will the CL46 4Rx4 modules work alongside older DDR5 RDIMMs already installed in the XE9780L or XE9785L?
Mixing ranks or latencies is not recommended; the system will run all channels at the slowest common speed and may require identical 4Rx4 CL46 modules for stability.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
