BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00273904BTC
Na zalogi
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 2666 CL19 SODIMM POSIFLEX XT-7515 JIVA memory upgrade
32GB kit of two 16GB DDR4 2666 CL19 SODIMM modules at 1.2V for the POSIFLEX XT-7515 JIVA terminal
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB total capacity across two 16 GB modules
- DDR4 2666 speed with CL19 latency for responsive operation
- 20 V low voltage reduces power draw in fanless terminals
- 260-pin SODIMM form factor fits POSIFLEX XT-7515 JIVA exactly
- Major OEM Samsung, Micron or Hynix chips ensure reliable performance
POSIFLEX XT-7515 JIVA 32GB kit
This 32GB kit contains two 16GB DDR4 2666 SODIMM modules built for the POSIFLEX XT-7515 JIVA fanless POS terminal. Each stick runs at 1.2V with CL19 latency and uses a 2Rx8 unbuffered non-ECC layout. The 260-pin form factor matches the system's memory slots exactly.
Sustained transaction workloads
Modules are stress tested under load before shipping to verify stability during continuous operation. The 2666 MT/s data rate and 1.2V voltage maintain consistent throughput without thermal throttling in the fanless chassis. Dual-rank organisation helps keep the memory controller busy during peak retail hours.
Major OEM chips, no spreader
Samsung, Micron or Hynix ICs are used depending on supply, all qualified for the POSIFLEX platform. The bare PCB design fits the tight clearances of the XT-7515 JIVA without a heat spreader. Installation follows the terminal's service manual and requires no extra tools.
Poudarki
- 32 GB total capacity across two 16 GB modules
- DDR4 2666 speed with CL19 latency for responsive operation
- 20 V low voltage reduces power draw in fanless terminals
- 260-pin SODIMM form factor fits POSIFLEX XT-7515 JIVA exactly
- Major OEM Samsung, Micron or Hynix chips ensure reliable performance
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT |
Vprašanja o tem izdelku
How much power does the 1.2V DDR4 kit draw when the POS terminal runs continuously?
Each module operates at 1.2V, the standard DDR4 voltage, so power draw stays low even during all-day operation in the fanless XT-7515 JIVA.
What must the POSIFLEX XT-7515 JIVA already have for this 260-pin SODIMM kit to install?
The terminal needs two free 260-pin DDR4 SODIMM slots and a BIOS that accepts 2Rx8 non-ECC unbuffered modules at 2666 MT/s.
Will the CL19 2666 MT/s modules work alongside any original memory left in the XT-7515 JIVA?
Yes, the kit is validated for the XT-7515 JIVA; if existing sticks are also DDR4 2666 non-ECC SODIMMs they will run together at the same speed and timings.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
