Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green 260-pin DDR4 SODIMM module without heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-pin SODIMM POSIFLEX ZT-3116 memory upgrade

SKU CH-J3KD-SFHMH

8GB DDR4 3200 SODIMM upgrades POSIFLEX ZT-3116 terminals with CL22 1.2V non-ECC memory

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity boosts POS terminal multitasking
  • DDR4 3200 speed handles demanding retail workloads
  • CL22 latency ensures stable transaction processing
  • 2V operation reduces terminal power draw
  • 260-pin SODIMM fits Posiflex ZT-3116 exactly

System-Specific POS Upgrade

This 8GB DDR4 SODIMM is built for the POSIFLEX ZT-3116 Haydn ZT Series point-of-sale terminal. It delivers a direct memory upgrade for kiosk and retail systems that require validated compatibility. The module installs in a standard 260-pin slot without configuration changes.

Thermals and Power

Operating at 1.2V, the unbuffered non-ECC module runs within standard DDR4 power limits for slim POS chassis. No heat spreader is fitted, relying on the terminal's existing airflow for cooling. The low-voltage design keeps power draw minimal during continuous transaction workloads.

Decisive Specification

The 3200MHz CL22 2Rx8 configuration matches the exact timing and rank structure required by the ZT-3116 platform. Systems needing a different rank count or latency will not recognise this module correctly.

Poudarki

  • 8GB capacity boosts POS terminal multitasking
  • DDR4 3200 speed handles demanding retail workloads
  • CL22 latency ensures stable transaction processing
  • 2V operation reduces terminal power draw
  • 260-pin SODIMM fits Posiflex ZT-3116 exactly

Specifikacije

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Vprašanja o tem izdelku

How do I install the 260-pin DDR4 SODIMM into the POSIFLEX ZT-3116 and what step is often missed?

Power off the terminal, remove the access panel, align the notch on the module with the slot key, press firmly until both retention clips click, then replace the panel; the step often missed is ensuring both clips fully engage before closing the case.

What maintenance or replacement will this 8GB CL22 module need during its service life?

No scheduled maintenance is required; if a memory error appears, reseat the module and run a diagnostic — otherwise it remains in place for the terminal's lifetime.

What limit appears first when the POS terminal runs sustained workloads on this 3200MHz 1.20V memory?

The CL22 latency and 2Rx8 organisation set the throughput ceiling; under continuous load the memory bus saturates before thermal or voltage limits become a factor.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.