Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green rectangular DDR5 RDIMM module with black chips on both sides no heat spreader 288 gold pins visible

NEMIX RAM

NEMIX RAM DDR5 4800 96GB 2Rx4 CL40 1.1V ECC RDIMM H14DSG-OD memory upgrade

SKU CH-1JMG-KZ6WT

96 GB DDR5-4800 ECC registered RDIMM with 2Rx4 CL40 timing at 1.1 V for Supermicro H14DSG-OD servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB

Prikaži še 30 konfiguracij
  • 96 GB capacity lets you run large workloads without swapping
  • DDR5 4800 speed transfers data at PC5-38400 bandwidth for server throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation reduces power draw per module in dense configurations
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD memory slots exactly

96GB DDR5-4800 ECC RDIMM for Supermicro H14DSG-OD

This 96GB DDR5-4800 (PC5-38400) registered ECC module is built for the Supermicro H14DSG-OD motherboard. It uses the 288-pin RDIMM form factor with 2Rx4 organisation, 1.10V operation and CL40 latency. The exact rank, voltage and timing match the board's memory controller so the full capacity is recognised at rated speed.

DDR5 registered ECC limits

DDR5 registered ECC memory offloads the memory controller to allow full population of every slot at rated capacity and speed. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. The registered architecture adds one cycle of latency but enables the high densities required by multi-socket server platforms.

Upgrade from smaller or unbuffered DDR5

This kit replaces lower-capacity DDR5 RDIMMs or non-ECC UDIMMs that cannot be used in the H14DSG-OD. The jump is worth it when the workload demands maximum memory per channel with error correction and the motherboard manual confirms support for 96GB 2Rx4 modules in the required population order.

Poudarki

  • 96 GB capacity lets you run large workloads without swapping
  • DDR5 4800 speed transfers data at PC5-38400 bandwidth for server throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation reduces power draw per module in dense configurations
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD memory slots exactly

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Should I choose the 96GB DDR5 4800 CL40 kit or a lower-capacity module for my Supermicro H14DSG-OD?

The 96GB 2Rx4 Registered ECC RDIMM matches the board's qualified parts list exactly, so the memory controller recognises the full capacity at the rated 4800 MT/s without downclocking.

What does the 4800 MT/s rating deliver once the module is installed in the server?

At 4800 MT/s the DIMM provides PC5-38400 bandwidth, and the registered buffer lets every populated slot run at that speed even in a fully loaded configuration.

How does the 288-pin DDR5 RDIMM interface limit performance in practice?

The 288-pin RDIMM form factor carries DDR5 signalling at 1.1 V with on-die ECC, and the registered clock driver caps electrical load so signal integrity is maintained across all channels.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.