Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Six green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 288GB (6x48GB) CL46 1.1V ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-AQWX-M1BF3

A 288 GB DDR5 ECC RDIMM kit of six 48 GB modules at 5600 MHz CL46 1.1 V, validated for the Supermicro H14DST-FL motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Prikaži še 30 konfiguracij
  • 288 GB total capacity from six 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14DST-FL
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the board's memory controller specification exactly
  • Lifetime replacement warranty with US-based technical support included

288GB DDR5-5600 ECC RDIMM Kit

This 288GB kit contains six 48GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro H14DST-FL motherboard. It targets server administrators who need maximum registered capacity with on-die error correction for production workloads. The modules run at 1.10V with CL46 latency and a 2Rx8 organisation that matches the board's memory-controller expectations. Buyers who need unbuffered UDIMMs or non-ECC memory for a workstation cannot use this kit.

Verify H14DST-FL DIMM Population Rules

Before ordering, consult the Supermicro H14DST-FL manual for the approved DIMM population sequence and maximum supported capacity per channel. The board requires 288-pin Registered RDIMMs; UDIMMs or SODIMMs will not fit or function. Confirm that your BIOS revision recognises 48GB dual-rank modules at the rated 5600 MT/s speed. Systems with different memory-population rules or a different registered-DIMM pinout are not compatible.

Thermals Noise and Power at 1.10V

The modules operate at the standard DDR5 server voltage of 1.10V without a heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping per-module power draw low when all six slots are populated. ECC correction runs transparently during normal operation, adding no audible noise and minimal latency overhead in typical server environments.

Poudarki

  • 288 GB total capacity from six 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14DST-FL
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the board's memory controller specification exactly
  • Lifetime replacement warranty with US-based technical support included

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What is included in the 288GB kit and do I need to buy any extra modules?

The kit contains six 48GB DDR5 5600 CL46 1.1V ECC Registered RDIMMs for a total of 288GB; no additional modules are required to reach that capacity.

Should I choose the 6x48GB kit or a different capacity for my Supermicro H14DST-FL?

Select the 6x48GB kit when your board's qualified vendor list approves 2Rx8 Registered DIMMs at DDR5-5600 and you need the full 288GB across all populated slots.

What does the DDR5-5600 PC5-44800 rating mean once the memory is installed in the server?

The modules will run at 5600 MT/s with CL46 latency at 1.1V, delivering the rated bandwidth and registered ECC stability the H14DST-FL memory controller expects.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.