Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 64GB 2x32GB CL46 ECC Registered RDIMM Supermicro H14DST-F memory upgrade

SKU CH-CFNW-W9HP2

64 GB kit of two 32 GB DDR5 5600 RDIMMs with ECC, registered design, CL46 latency and 1.1 V operation for the Supermicro H14DST-F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Prikaži še 30 konfiguracij
  • 64 GB total capacity lets Supermicro H14DST-F run fully populated at rated speed
  • Registered ECC RDIMM offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 5600 CL46 at 1.1 V matches the board's exact timing and voltage requirements
  • 2Rx8 dual-rank organisation delivers maximum density per slot for 2×32 GB configuration
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard without adapters

Exact-match DDR5 RDIMM kit for Supermicro H14DST-F

This 64 GB kit contains two 32 GB DDR5 5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the motherboard expects. It is designed for administrators upgrading a Supermicro H14DST-F server that requires 288-pin Registered memory with ECC. Builders needing unbuffered UDIMMs or laptop SODIMMs cannot use this kit.

Installation notes and common issues

The modules use the standard 288-pin RDIMM form factor and install like any server DIMM, but the board’s population rules must be followed exactly. The most frequent problem is inserting the DIMMs in the wrong slot order or mixing ranks, which prevents the system from recognising the full 64 GB capacity. Always consult the motherboard manual for the approved population sequence before seating the modules.

Registered ECC architecture with CL46 timing

Registered buffering offloads the memory controller so every slot can run fully populated at the rated 5600 MT/s speed, while on-die ECC corrects single-bit errors before they reach production workloads. The kit operates at 1.1 V with a CAS latency of CL46. Systems that require unbuffered memory or a different latency profile will not be compatible.

Poudarki

  • 64 GB total capacity lets Supermicro H14DST-F run fully populated at rated speed
  • Registered ECC RDIMM offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 5600 CL46 at 1.1 V matches the board's exact timing and voltage requirements
  • 2Rx8 dual-rank organisation delivers maximum density per slot for 2×32 GB configuration
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard without adapters

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How can I verify the kit is running at DDR5-5600 CL46 1.10V after installing it in the Supermicro H14DST-F?

Enter the BIOS or use a hardware monitor such as IPMI to confirm the memory frequency shows 5600 MT/s, CAS latency 46 and voltage 1.10V with both 32 GB modules detected for 64 GB total.

What ships in the box and is anything else required for installation?

The package contains the 64 GB kit (2 × 32 GB DDR5 5600 PC5-44800 2Rx8 1.10V CL46 288-pin ECC Registered RDIMMs). No extra parts are needed; install directly into the motherboard DIMM slots.

Which capacity and rank configuration should I choose for the H14DST-F?

This 64 GB kit provides 2 × 32 GB 2Rx8 Registered ECC modules at DDR5-5600 CL46 1.10V, matching the board's validated population rules for full-capacity operation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.