Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two green DDR5 RDIMM modules, bare circuit boards with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM DDR5 64GB (2x32GB) 4800MHz CL40 2Rx8 ECC Registered RDIMM for Supermicro H13SST-G memory upgrade

SKU CH-HWTV-Y8NA2

64 GB DDR5 kit of two 32 GB registered ECC RDIMMs at 4800 MHz CL40, 1.1 V, 2Rx8, validated for the Supermicro H13SST-G motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Prikaži še 24 konfiguracij
  • 64 GB capacity from two 32 GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated throughput for the Supermicro H13SST-G
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operating voltage matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor ensures mechanical and electrical compatibility with the target motherboard

64GB DDR5 ECC RDIMM kit for Supermicro H13SST-G

This 64GB kit contains two 32GB DDR5-4800 registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SST-G memory controller expects. It targets server administrators who need guaranteed recognition at full capacity and rated speed without manual tuning.

DDR5-4800 registered ECC limits

The modules run at DDR5-4800 (PC5-38400) with CL40 latency at 1.10V using a 2Rx8 organisation. Registered buffering lets every slot run fully populated at full capacity, while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit or function on this board.

Installation and common issues

Insert the DIMMs in the population order specified by the Supermicro H13SST-G manual to enable all 64GB at DDR5-4800. The most frequent problem is ignoring the board's slot sequence, which causes reduced capacity or fallback speeds. Verify the approved configuration before purchase and follow the documented installation steps.

Poudarki

  • 64 GB capacity from two 32 GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated throughput for the Supermicro H13SST-G
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operating voltage matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor ensures mechanical and electrical compatibility with the target motherboard

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Should I choose the 64GB kit with two 32GB modules or a different capacity for my Supermicro H13SST-G?

This kit provides exactly 64GB using two 32GB Registered ECC RDIMMs, matching the motherboard's DDR5 slot requirements and population rules for full-capacity operation.

What does the DDR5-4800 speed rating mean once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with CL40 latency at 1.1V, delivering the rated PC5-38400 bandwidth when the board is fully populated with these 2Rx8 Registered DIMMs.

How does the 288-pin RDIMM interface and Registered ECC design affect real-world use?

The 288-pin Registered form factor is required by the H13SST-G; registration buffers the address bus so every slot runs stably at full capacity, while ECC corrects single-bit errors to prevent silent data corruption.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.