Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 32GB 5600MHz CL46 2Rx8 1.1V 288-Pin Supermicro H14DST-F memory upgrade

SKU CH-WD39-GW585

32 GB DDR5 5600 MHz CL46 2Rx8 registered ECC RDIMM at 1.1 V for Supermicro H14DST-F servers

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

Prikaži še 30 konfiguracij
  • Exact-match upgrade for Supermicro H14DST-F ensures full-speed recognition
  • 32 GB DDR5 5600 MHz CL46 delivers rated performance at 1.1 V
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 2Rx8 288-pin RDIMM form factor matches board population rules exactly
  • Lifetime replacement warranty with US-based technical support included

Exact-Match DDR5 Upgrade for Supermicro H14DST-F

This 32GB DDR5-5600 Registered ECC RDIMM is built to the precise rank, voltage, and timing the Supermicro H14DST-F memory controller expects. It installs as a direct drop-in module so the server recognises the full capacity and runs at the rated speed without manual tuning.

Registered ECC Architecture with 2Rx8 Organisation

The module uses a 2Rx8 registered design at 1.1V with CL46 latency, matching the board's population rules for fully populated slots. Registered buffering offloads the memory controller while on-die ECC corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads.

288-Pin RDIMM Form Factor for Server Chassis

The 288-pin DDR5 RDIMM fits only motherboards wired for registered memory — it will not seat in UDIMM or SODIMM slots. Buyers needing unbuffered desktop modules or laptop SO-DIMMs should look elsewhere. Consult the H14DST-F manual for approved DIMM population order and maximum supported capacity before installation.

Poudarki

  • Exact-match upgrade for Supermicro H14DST-F ensures full-speed recognition
  • 32 GB DDR5 5600 MHz CL46 delivers rated performance at 1.1 V
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 2Rx8 288-pin RDIMM form factor matches board population rules exactly
  • Lifetime replacement warranty with US-based technical support included

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What does the 5600 MHz rating mean once the module is installed in a Supermicro H14DST-F server?

The module will operate at DDR5-5600 (PC5-44800) with CL46 latency at 1.1 V, delivering the full rated throughput the board's memory controller expects.

How does the 288-pin RDIMM interface affect usable capacity and speed on this platform?

The registered 288-pin DDR5 RDIMM form factor matches the H14DST-F slots exactly; the buffered architecture lets every populated slot run at the full 32 GB capacity and 5600 MHz without downclocking.

What physical clearance and slot type does this 2Rx8 module need to fit correctly?

It requires a standard 288-pin DDR5 RDIMM slot on the H14DST-F motherboard; the module has no heat spreader, so it fits in tight server chassis with normal DIMM spacing.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.