Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green printed circuit board with gold edge connector, single RJ45 port, silver bracket, low-profile bracket included

NShi

NShi AQC113 10 Gbps PCIe RJ45 network card

SKU CH-KHPM-13XRX

Adds a 10 Gbps RJ45 Ethernet port via a PCIe 4.0 x1 slot using the AQC113 chipset, with full-height and low-profile brackets included

  • Speed10 Gbps
  • ConnectorsEthernet (RJ-45)
  • InterfaceEthernet (RJ-45)
  • BUSPCI Express
  • True 10 Gbps speed over existing RJ45 cables
  • Marvell AQC113 chipset with PCIe 4.0 x1 interface
  • Fits PCIe x1, x4, x8, x16 slots
  • Includes full-height and low-profile brackets
  • Wake-on-LAN and auto-negotiation support

10 Gbps PCIe RJ45 network card

The NShi AQC113 adds a 10 Gbps Ethernet port to a desktop or server through a single PCIe slot. It uses the Marvell AQC113 controller and supports 10G, 5G, 2.5G and 1G speeds over standard RJ45 cabling. The adapter targets users who need faster wired throughput for large file moves, high-bitrate streaming or low-latency gaming.

Check your motherboard slot and bracket height

The card fits PCIe x1, x4, x8 and x16 slots and runs on a PCIe 4.0 x1 electrical link. Verify that a free slot is physically accessible and that the rear I/O opening matches the bracket you will use. Both full-height and low-profile brackets are supplied, so confirm which one suits your chassis before installation.

Gold-plated RJ45 and dual-bracket flexibility

Gold-plated connectors and solid capacitors on an optimised PCB aim for stable, low-latency operation. The included full-height and low-profile brackets let the same card mount in a standard ATX tower or a compact small-form-factor system without extra parts. Wake-on-LAN and auto-negotiation are supported for everyday manageability.

Poudarki

  • True 10 Gbps speed over existing RJ45 cables
  • Marvell AQC113 chipset with PCIe 4.0 x1 interface
  • Fits PCIe x1, x4, x8, x16 slots
  • Includes full-height and low-profile brackets
  • Wake-on-LAN and auto-negotiation support

Specifikacije

Brandfenvi
ModelAQC113
Part NumberAQC113
Speed10 Gbps
ConnectorsEthernet (RJ-45)
InterfaceEthernet (RJ-45)
BUSPCI Express

Vprašanja o tem izdelku

Does the AQC113 card ship with both full-height and low-profile brackets included?

Yes, the card comes with dual brackets — full-height and low-profile — so it fits standard ATX cases and compact SFF builds without extra purchases.

Should I pick the AQC113 or a 2.5 Gbps model for my 10 Gbps internet plan?

Choose the AQC113; it supports 10, 5, 2.5 and 1 Gbps speeds, matching a 10 Gbps plan while remaining backward compatible.

What real-world throughput can I expect from the 10 Gbps rating on a PCIe 4.0 x1 slot?

The PCIe 4.0 x1 link provides roughly 16 Gbps of bus bandwidth, giving enough headroom for the card to sustain near-line-rate 10 Gbps transfers.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.