Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 80mm square cooling fan with three wires

OEM Industries

OEM Industries D08T-24TM 80mm 24VDC 3 Pin CPU cooler

SKU CH-BMGE-38EXA

An 80 mm fan for CPU cooling running on 24 VDC with a three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Power Connector3 Pin
  • LEDNo
  • 80 mm frame fits compact builds
  • 24 V DC motor runs on standard industrial rails
  • 06 A draw keeps power budget low
  • Three-pin connector reports speed to the motherboard
  • NIDEC 8025 mechanism delivers proven bearing life

Compact 80 mm 24 V DC fan for tight builds

This OEM Industries D08T-24TM unit is an 80 mm square frame measuring 25 mm thick, designed to fit narrow chassis or legacy sockets where larger coolers cannot mount. It suits system integrators and hobbyists who need a direct 24 V DC airflow source without PWM control.

Three-pin 24 V DC interface limits speed reporting

The 3-pin connector supplies power and a tachometer signal but lacks a fourth PWM wire, so the motherboard or controller can only monitor RPM, not regulate it dynamically. Running at the fixed 0.06 A draw means airflow stays constant, which may be audible in quiet environments.

Nidec 8025 motor in a black plastic frame

The Nidec 8025 motor is housed in a black 80×80×25 mm frame with three lead wires ending in a standard 3-pin header. No LED lighting is present, keeping the visual profile neutral for server or industrial enclosures where indicator lights are unwanted.

Poudarki

  • 80 mm frame fits compact builds
  • 24 V DC motor runs on standard industrial rails
  • 06 A draw keeps power budget low
  • Three-pin connector reports speed to the motherboard
  • NIDEC 8025 mechanism delivers proven bearing life

Specifikacije

ModelD08T-24TM
ColorBlack
TypeFan only
Fan Size80mm
Power Connector3 Pin
LEDNo

Vprašanja o tem izdelku

Which 80 mm fan version matches a 24 VDC 3 pin header?

The D08T-24TM is an 80×80×25 mm fan rated for 24 VDC with a 3 pin connector, so it fits headers that supply 24 volts and accept a three pin plug.

What does the 0.06 A rating mean once the fan is installed?

At 24 V the fan draws 0.06 amps, so it adds very little load to the 24 V rail while delivering 80 mm airflow.

How does the 3 pin interface limit speed control?

A 3 pin connector provides power, ground and a tachometer signal; voltage regulation is possible but PWM control is not supported.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.