Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 60mm blower fan with 3-pin connector

OEM Industries

OEM Industries TYF400FJ07 60mm 12V 0.33A 3.96W 3-Pin Blower Fan

SKU CH-XVFC-K3TYF

60 mm blower fan with ball bearing and 3-pin connector runs at 12 V, 0.33 A for 3.96 W

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Ball bearing reduces friction for longer service life
  • 60 mm blower design directs airflow through tight projector or case spaces
  • 12 V 0.33 A draws only 3.96 W for efficient cooling
  • Three-pin connector enables motherboard speed monitoring
  • Compact 60 × 25 mm frame fits small form-factor builds

Compact Blower for Tight Spaces

The OEM Industries TYF400FJ07 is a 60 mm blower-style fan built for confined enclosures. It targets system integrators and repair technicians who need directed airflow through narrow channels in projectors, small-form-factor PCs or industrial appliances. The 3-pin connector provides simple voltage control without PWM complexity.

Low-Power Thermal Performance

Ball-bearing construction supports continuous operation at 12 V while drawing only 0.33 A and 3.96 W. The blower wheel pushes air perpendicular to the intake, creating focused static pressure that moves heat through restricted ducts. Acoustic output remains modest thanks to the low rotational speed required for this power envelope.

Ready-to-Install Simplicity

The unit ships as a bare fan with three wires terminated in a standard 3-pin housing — no LED lighting, no mounting brackets and no speed-control software. Installers can connect it directly to a motherboard header or a 12 V rail and secure it with four 60 mm mounting points. The black frame blends into dark chassis interiors.

Poudarki

  • Ball bearing reduces friction for longer service life
  • 60 mm blower design directs airflow through tight projector or case spaces
  • 12 V 0.33 A draws only 3.96 W for efficient cooling
  • Three-pin connector enables motherboard speed monitoring
  • Compact 60 × 25 mm frame fits small form-factor builds

Specifikacije

ModelTYF400FJ07
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Vprašanja o tem izdelku

How do I mount the 60 mm blower fan and which orientation step is often missed?

Align the four corner screw holes on the 60 mm frame, then orient the blower outlet toward the heatsink fins so air is pushed through them — reversing this direction is the common error.

What maintenance will the ball-bearing 12 V 0.33 A fan need over time?

Ball bearings run without lubrication top-ups; plan to clean dust from the blower wheel and intake vents every 6–12 months and replace the unit if bearing noise appears.

At what point does the 3.96 W blower hit its thermal limit during sustained load?

The 12 V 0.33 A motor is rated for continuous operation at its specified power; the first limit reached is the maximum airflow the 60×25 mm blower wheel can sustain at that wattage.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.