Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM module

OWC

OWC 2GB DDR3 1066 PC3-8500 CL7 1Rx8 204-pin 1.5V Non-ECC SODIMM HP 2000 memory upgrade

SKU CH-5Z7H-S8T8G

A 2GB DDR3 1066 CL7 SODIMM built for HP 2000 series laptops using DDR3 memory

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • 2GB DDR3 1066 boosts HP 2000 responsiveness
  • CL7 latency speeds data access for multitasking
  • 5V JEDEC standard protects system warranty
  • 204-pin SODIMM fits HP 2000 DDR3 slots
  • Single 1Rx8 module simplifies DIY installation

HP 2000 Series DDR3 Upgrade

This OWC module delivers 2GB of DDR3 memory at 1066MHz with CL7 latency. It is built specifically for HP 2000 series notebooks that use DDR3 SO-DIMM slots. The 204-pin unbuffered design fits directly into compatible laptops without configuration changes.

Sustained Load Behaviour

JEDEC-standard timings and 1.5V operation keep the module stable during extended multitasking sessions. Non-ECC unbuffered architecture provides consistent throughput for everyday workloads such as web browsing, office applications and media playback. The single-rank 1Rx8 organisation helps maintain predictable latency under continuous use.

Build And Connector Details

The stick uses a standard 204-pin SO-DIMM edge connector with no heat spreader, allowing it to seat cleanly in tight laptop chassis. RoHS-compliant PCB construction meets environmental regulations while the green circuit board resists corrosion. Installation requires only a small screwdriver and access to the memory compartment on supported HP 2000 models.

Poudarki

  • 2GB DDR3 1066 boosts HP 2000 responsiveness
  • CL7 latency speeds data access for multitasking
  • 5V JEDEC standard protects system warranty
  • 204-pin SODIMM fits HP 2000 DDR3 slots
  • Single 1Rx8 module simplifies DIY installation

Specifikacije

BrandOWC
Part Number8S5D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP 2000 Series using DDR3 Memory

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How much heat and power does the 1.5V DDR3 1066 SODIMM add when the HP 2000 runs all day?

The module operates at the standard JEDEC 1.5 V for DDR3 1066, so it draws only the power defined for that speed and voltage. It has no heat spreader, meaning it relies on the laptop's existing airflow, and it adds no extra thermal load beyond a typical 2 GB DDR3 SO-DIMM.

What must the HP 2000 already have for this 204-pin DDR3 1066 module to work?

The notebook needs a free 204-pin DDR3 SO-DIMM slot that accepts 1.5 V unbuffered non-ECC memory at 1066 MHz (PC3-8500). The system must also support 1Rx8 density so the single 2 GB rank is recognised.

Will this CL7 1066 MHz DDR3 stick run correctly alongside the original HP 2000 memory?

Yes. The module follows JEDEC PC3-8500 CL7 timings at 1.5 V, so the memory controller will down-clock any faster existing sticks to 1066 MHz and apply the common CAS-7 latency, keeping the whole array stable.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.