Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green printed circuit board with black memory chips and gold edge connectors

OWC

OWC 2R9D42R432GB 32GB DDR4 2933 CL21 ECC RDIMM memory upgrade

SKU CH-XREE-FEX9D

32 GB DDR4 2933 MHz ECC registered DIMM for Supermicro X11SPA-TF, X11SPD-F, X11SPG-TF, X11SPH-nCTF and X11SPH-nCTPF motherboards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • 32 GB capacity expands server memory headroom
  • DDR4 2933 MHz speed with CL21 latency
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • Validated for Supermicro X11SPA-TF, X11SPD-F, X11SPG-TF, X11SPH-nCTF, X11SPH-nCTPF

Server memory upgrade

This 32GB OWC DDR4 2933 CL21 ECC RDIMM is built for Supermicro X11SPA-TF, X11SPD-F, X11SPG-TF, X11SPH-nCTF and X11SPH-nCTPF motherboards. It runs at 1.2V with a 2Rx4 rank layout and no heat spreader. The registered design adds signal integrity for multi-DIMM server configurations.

Suits ECC servers only

This module fits workstations, servers and NAS systems that require registered ECC DDR4. It will not work in standard desktop boards that accept only unbuffered memory. Mixing it with unbuffered DIMMs is not supported. Buyers needing non-ECC or unbuffered memory should look elsewhere.

Registered ECC decides fit

The single specification that determines compatibility is the registered ECC RDIMM form factor. Your motherboard must explicitly support registered ECC DDR4 at 288 pins. If the platform requires unbuffered or non-ECC modules, this part will not function.

Poudarki

  • 32 GB capacity expands server memory headroom
  • DDR4 2933 MHz speed with CL21 latency
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • Validated for Supermicro X11SPA-TF, X11SPD-F, X11SPG-TF, X11SPH-nCTF, X11SPH-nCTPF

Specifikacije

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SPA-TF
Supermicro Motherboard X11SPD-F
Supermicro Motherboard X11SPG-TF
Supermicro Motherboard X11SPH-nCTF
Supermicro Motherboard X11SPH-nCTPF

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What motherboard must I already have to install this 288‑pin DDR4 2933 ECC RDIMM?

It is validated for Supermicro X11SPA‑TF, X11SPD‑F, X11SPG‑TF, X11SPH‑nCTF and X11SPH‑nCTPF boards.

Can I keep my existing 2133 MHz or 2400 MHz DDR4 modules and add this 2933 MHz kit?

Yes, the module is backward compatible with 2133 MHz, 2400 MHz and 2666 MHz speeds, but it cannot be mixed with unbuffered memory.

How do I verify the module is running at 2933 MHz with ECC active after installation?

Check the BIOS memory information or run a tool such as dmidecode to confirm 2933 MT/s, CL21 timings and ECC registered status.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.