NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
OWC
32 GB DDR4 ECC registered RDIMM running at 2666 MHz with CL19 latency and 1.2 V operation for servers and workstations
This 32GB DDR4 module runs at 2666MHz with CL19 latency and 1.2V operation. It is built as a 288-pin ECC registered RDIMM using a 2Rx4 organisation. The part is designed for servers, workstations and NAS systems that require registered memory with error correction. It will not work in standard desktop computers that accept only unbuffered DIMMs.
The module follows JEDEC standard specifications and is RoHS compliant. It carries no heat spreader, relying on server chassis airflow for cooling. The 288-pin registered interface ensures electrical buffering on the command bus, which allows higher capacities per channel but prevents mixing with unbuffered memory in the same system. Backward compatibility covers 2133MHz and 2400MHz bus speeds.
This OWC part matches the specifications of Supermicro MEM-DR432L-SL02-ER26 and MEM-DR432L-SL03-ER26 modules. It serves as a direct replacement for those part numbers when expanding or repairing compatible platforms. The upgrade is worthwhile when the platform supports DDR4 registered ECC memory and the workload benefits from the additional 32GB capacity per slot. Buyers needing unbuffered memory or desktop compatibility should look elsewhere.
| Brand | OWC |
|---|---|
| Part Number | 2R6D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
The module runs at PC4-21300 2666MHz CL19; it will also down-clock to 2133MHz or 2400MHz if the platform requires it.
It requires a 288-pin DDR4 RDIMM slot in a server, workstation or NAS; it will not fit or work in standard desktop UDIMM sockets.
Power down the system, align the 288-pin key with the registered DIMM slot, press firmly until the ejector clips lock, then verify the BIOS recognises the ECC registered capacity.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?