Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green rectangular circuit board with gold edge connector and black memory chips

OWC

OWC 4GB DDR3 1600 CL11 1Rx8 204-pin 1.5V Non-ECC SODIMM Synology memory upgrade

SKU CH-TVQN-Y9Y4V

4 GB DDR3 1600 SODIMM module for Synology NAS models RS815RP+, DS2015xs, DS2415+, RS2416+ and RS2416RP+

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 4GB DDR3 1600 boosts multitasking on compatible Synology NAS
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • CL11 1.5V unbuffered SODIMM installs in minutes
  • Tested to meet or exceed OEM specifications
  • Replaces Synology RAM1600DDR3-4G part number

4GB DDR3 SODIMM for Synology NAS

This 4GB DDR3 1600 CL11 SODIMM module is built for Synology NAS models RS815RP+, DS2015xs, DS2415+, RS2416+ and RS2416RP+. It uses 204-pin unbuffered non-ECC memory running at 1.5V to match the original OEM specification. The single-rank 1Rx8 design installs directly into the available memory slot.

NAS owners adding capacity; not for ECC systems

Owners of the listed Synology units who need more memory for virtual machines or heavy file workloads will find this upgrade matches the factory configuration. Buyers whose NAS requires ECC registered DIMMs or a different voltage must choose a different module. Systems outside the compatibility list are not supported.

Single 4GB DDR3 1600 CL11 SODIMM stick

The decisive specification is the single 4GB stick rated at DDR3 1600 with CL11 latency in the 204-pin SODIMM form factor. It replaces Synology part number RAM1600DDR3-4G and operates at the standard 1.5V JEDEC voltage. Matching this exact speed, voltage and form factor determines whether the module will work.

Poudarki

  • 4GB DDR3 1600 boosts multitasking on compatible Synology NAS
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • CL11 1.5V unbuffered SODIMM installs in minutes
  • Tested to meet or exceed OEM specifications
  • Replaces Synology RAM1600DDR3-4G part number

Specifikacije

BrandOWC
Part Number1S6D31R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology NAS RS815RP+
Synology NAS DS2015xs
Synology NAS DS2415+
Synology NAS RS2416+
Synology NAS RS2416RP+

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Does the CL11 latency limit throughput when the NAS runs sustained workloads?

CL11 is the rated CAS latency for this DDR3 1600 module; it sets the timing floor for every access cycle.

How much heat does the 1.5 V DDR3 SODIMM produce during all-day operation?

The module runs at standard 1.5 V without a heat spreader; typical DDR3 SODIMM power stays low enough for passive cooling inside Synology NAS enclosures.

Which Synology NAS models must I already own for this 204-pin DDR3 1600 SODIMM to work?

Compatible systems are RS815RP+, DS2015xs, DS2415+, RS2416+ and RS2416RP+; the module replaces Synology part RAM1600DDR3-4G.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.