Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Gray 12.1 inch all-in-one panel PC with resistive touch screen and aluminum alloy chassis

partaker

partaker A26 12.1" resistive touch AI edge system i3-3217U 4GB 128GB

SKU CH-AE9A-7GHM5

A 12.1-inch resistive touch panel PC with an IP65 front, fanless aluminium chassis, Intel Core i3-3217U at 1.80 GHz, 4 GB DDR3, 128 GB mSATA, dual Gigabit LAN, two serial ports.

  • TypeAll-in-One PC
  • Form FactorAll-in-One
  • ColorGray
  • Operating SystemWindows 10 Pro
  • CPU TypeIntel Core i3 3rd Gen
  • CPU NameIntel Core i3-3217U

A26 12.1" Resistive i3 3217U 4GB RAM / 128GB SSD

  • Fanless aluminium chassis runs silently in dusty environments
  • IP65 front panel resists water jets and dust ingress
  • 1" resistive touch screen rated for 50 million touches
  • Dual Gigabit LAN plus configurable serial ports connect factory gear
  • Intel Core i3-3217U with 4 GB DDR3 and 128 GB mSATA drives control tasks

12.1-inch resistive touch industrial panel PC

The Partaker A26 is a fanless all-in-one system built around a 12.1-inch TFT-LCD display with a resistive touch overlay. Its aluminium alloy chassis carries an IP65-rated front panel that resists dust and water jets. The Intel Core i3-3217U dual-core processor runs at 1.80 GHz with 4 GB of DDR3 memory and a 128 GB mSATA drive. Windows 10 Pro comes pre-installed for immediate deployment in industrial control and monitoring roles.

IP65 front panel and fanless thermal design

The fully sealed front face meets IP65 protection while the completely fanless construction eliminates moving parts and audible noise. This combination allows reliable operation in dusty, humid or vibration-prone environments where conventional PCs would fail. Standard VESA mounting and a 298.5 mm by 237 mm cutout option simplify embedded installation in cabinets or machinery panels.

4 GB DDR3 and 128 GB mSATA with expansion headroom

The single DDR3 slot supports up to 8 GB maximum, so the shipped 4 GB configuration leaves room for memory-intensive HMI or data-logging tasks. One mSATA slot holds the included 128 GB drive and can be swapped for larger capacity when local storage demands grow. Two Mini PCIe slots accept wireless modules with SIM support, while dual Gigabit Ethernet ports and configurable serial ports handle deterministic factory networking.

Poudarki

  • Fanless aluminium chassis runs silently in dusty environments
  • IP65 front panel resists water jets and dust ingress
  • 1" resistive touch screen rated for 50 million touches
  • Dual Gigabit LAN plus configurable serial ports connect factory gear
  • Intel Core i3-3217U with 4 GB DDR3 and 128 GB mSATA drives control tasks

Specifikacije

TypeAll-in-One PC
Form FactorAll-in-One
ColorGray
Operating SystemWindows 10 Pro
CPU TypeIntel Core i3 3rd Gen
CPU NameIntel Core i3-3217U
Screen Size12.1"
Screen TypeMulti-Touch Screen

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How does the 1.80 GHz i3-3217U perform in a fanless industrial chassis?

The dual-core processor runs at 1.80 GHz inside an all-aluminium fanless enclosure, so sustained workloads rely on passive heat dissipation across the chassis rather than active cooling.

What display outputs does the HDMI port support alongside the built-in 12.1" panel?

The HDMI port and the internal LVDS connection drive synchronous or asynchronous dual displays, letting the 1024 x 768 resistive panel show one image while an external monitor shows another.

What cutout size and VESA pattern are needed to embed the IP65 front panel?

The panel requires a 298.5 mm by 237 mm rectangular cutout and standard VESA mounting holes for secure embedded installation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.