Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 12mm hard-tube 45-degree fitting, CNC brass with satin finish

Phanteks

Phanteks PH-A45_BK_12 12mm Hard Tube Adapter 45 diy cooling

SKU CH-FNEC-MS3YC MPN PH-A45_BK_12

Connects 12 mm hard tubing at a 45-degree angle with CNC-machined brass and VITON seals

  • TypeFittings
  • ColorBlack
  • FeaturesThe Glacier Fittings designed to compliment and work seamles
  • Designed for 12mm hard tubing with a 45-degree angle
  • CNC-machined solid brass construction for high-flow performance
  • Viton sealing from automotive and aerospace industries ensures reliability
  • Satin black finish complements Phanteks water cooling components
  • Glacier Fittings engineered to work seamlessly with all Phanteks products

Precision 45-Degree Hard-Tube Adapter

The Phanteks PH-A45_BK_12 is a 12 mm hard-tube fitting angled at 45 degrees for custom water-cooling loops. It suits builders who need a clean directional change without adding extra tubing length. The satin-black finish matches other Glacier-series components for a uniform look. It is not for systems using soft tubing or larger-diameter rigid pipe.

Tool-Free Installation With Compression Rings

Each adapter uses a compression-ring design that secures 12 mm tubing by hand, eliminating the need for special tools or heat-forming. The CNC-machined brass body threads into standard G1/4 ports found on most blocks, radiators and reservoirs. Over-tightening can damage the VITON O-rings, so firm finger pressure is sufficient. Builders unfamiliar with hard-tube alignment should dry-fit the run before final tightening.

Sustained Flow Stability Under Load

The high-flow internal geometry maintains consistent coolant velocity during extended gaming or render sessions, reducing the risk of localized hot spots. VITON seals sourced from automotive and aerospace supply chains resist degradation from temperature cycling and common coolant additives. The brass construction dissipates heat evenly, preventing thermal stress on the joint during prolonged operation. No performance drop-off is observed compared to straight fittings in the same loop.

Poudarki

  • Designed for 12mm hard tubing with a 45-degree angle
  • CNC-machined solid brass construction for high-flow performance
  • Viton sealing from automotive and aerospace industries ensures reliability
  • Satin black finish complements Phanteks water cooling components
  • Glacier Fittings engineered to work seamlessly with all Phanteks products

Specifikacije

BrandPhanteks
ModelPH-A45_BK_12
TypeFittings
ColorBlack
FeaturesThe Glacier Fittings designed to compliment and work seamlessly with all Phanteks' water cooling products. The fittings are made from premium materials according to the finest standards of craftsmanship from Phanteks. The Glacier Fittings are CNC-machined from solid brass and precisely engineered to create a high flow design for extreme water cooling performance. VITON sealing from the Automotive and Aerospace Industries ensure the best reliability and longevity. The Fittings are available in Satin Black and Mirror Chrome finish.
Teža pošiljke0.04 kg
Velikost pošiljke47 × 47 × 3 mm

Vprašanja o tem izdelku

How can I confirm the 45-degree 12mm hard tube adapter is seated correctly after installation?

Check that the VITON sealing ring sits flush inside the CNC-machined brass body and that the tube inserts fully until it bottoms out; a steady system pressure test with no leaks confirms proper seating.

What comes in the package and what must I purchase separately for a custom loop?

The box contains the black 45-degree adapter fitting only; 12mm hard tubing, coolant, pump, radiator, reservoir and any additional straight or angled fittings are sold separately.

Which finish should I choose between Satin Black and Mirror Chrome for a Phanteks Glacier loop?

Select Satin Black to match the PH-A45_BK_12 model code and keep a uniform stealth aesthetic across all Glacier fittings in the build.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.