Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Brass 90-degree rotary elbow fitting in candy copper finish, 15mm extension, G1/4 threads

PrimoChill

PrimoChill G1/4 90° Rotary 15mm Extension Elbow Fitting Candy Copper

SKU CH-DJ86-P2X7V

A 15 mm extension elbow with 90-degree rotary action and 360-degree orientation for G1/4 liquid-cooling loops

  • TypeFittings
  • 360-degree rotation lets you aim the connection freely
  • 90-degree elbow redirects tubing instantly
  • 15 mm extension adds clearance for tight builds
  • 7 mm total height fits low-profile layouts
  • SX powder-coated brass resists corrosion in copper loops

G1/4 Rotary Extension Elbow

This PrimoChill fitting connects male and female G1/4 threads at a 90-degree angle. The 15 mm extension adds clearance for tight routing. A 360-degree rotary joint lets you orient the outlet in any direction. The brass body carries a Candy Copper SX powder-coated finish.

Verify thread and clearance first

Confirm every component in your loop uses standard G1/4 threads. Measure that 37.7 mm of total height fits between the port and any neighbouring parts. Ensure the 5 mm thread depth matches the port depth on your blocks or radiators. Check that the 15 mm installed base height clears surrounding hardware.

For custom loops needing angular routing

Suits builders who must redirect tubing at unconventional angles without stressing ports. The rotary action simplifies alignment in cramped cases. Not for systems using non-G1/4 thread standards. Buyers who need straight couplers or different extension lengths should look elsewhere.

Poudarki

  • 360-degree rotation lets you aim the connection freely
  • 90-degree elbow redirects tubing instantly
  • 15 mm extension adds clearance for tight builds
  • 7 mm total height fits low-profile layouts
  • SX powder-coated brass resists corrosion in copper loops

Specifikacije

TypeFittings

Vprašanja o tem izdelku

Does the PrimoChill G1/4 90° rotary elbow come with any extra seals or do I need to buy O-rings separately?

The fitting includes its own installed seals; no separate O-rings are required for the G1/4 threads.

When should I choose the 15 mm extension version instead of a shorter elbow?

Select this 15 mm extension when you need extra height clearance — 37.7 mm total — to route tubing around nearby components.

How much does the 90° rotary joint reduce flow once it is installed in a loop?

The 90° bend adds only a slight restriction; the 360° rotary lets you align the port for the smoothest possible path.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.