Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Flat orange flex cable with 22-pin and 15-pin ends, 200mm long

Raspberry Pi

Raspberry Pi CDSC1892 CSI Camera Adapter Cable 22-Pin to 15-Pin 200mm

SKU CH-MADE-FSBF8

A 200 mm flexible cable converts the Raspberry Pi 5 22-pin CSI port to a standard 15-pin camera connector

  • Connect CSI cameras to Raspberry Pi 5 using official 22-pin to 15-pin adapter
  • 200 mm flexible flat cable fits tight enclosures and custom mounts
  • Official Raspberry Pi accessory ensures reliable signal integrity for camera modules
  • 22-pin connector matches Pi 5 CSI port while 15-pin end fits standard camera boards
  • DSI and CSI cables are not interchangeable — this cable is CSI only

Official Raspberry Pi 5 CSI Cable 22-Pin to 15-Pin

This official Raspberry Pi accessory is a 200mm flexible flat cable that converts the 22-pin CSI connector on a Raspberry Pi 5 to the standard 15-pin camera interface. It enables a direct connection between the board and compatible CSI camera modules. The cable is designed specifically for the Raspberry Pi 5 platform.

For Pi 5 owners adding a standard CSI camera

Makers upgrading a Raspberry Pi 5 who need to attach a 15-pin CSI camera module will use this adapter. Builders working with older Raspberry Pi models that already have a 15-pin port do not require this cable. Users intending to connect a DSI display must obtain a separate DSI cable, as CSI and DSI cables are not interchangeable.

22-pin to 15-pin CSI pin conversion

The decisive specification is the 22-pin to 15-pin configuration, which matches the Raspberry Pi 5 camera port to legacy camera modules. The 200mm length determines the maximum distance between the board and the camera. Verify that your camera module uses a 15-pin CSI connector before purchasing.

Poudarki

  • Connect CSI cameras to Raspberry Pi 5 using official 22-pin to 15-pin adapter
  • 200 mm flexible flat cable fits tight enclosures and custom mounts
  • Official Raspberry Pi accessory ensures reliable signal integrity for camera modules
  • 22-pin connector matches Pi 5 CSI port while 15-pin end fits standard camera boards
  • DSI and CSI cables are not interchangeable — this cable is CSI only

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Should I pick the 22-pin or 15-pin end for my Pi 5?

The cable has a 22-pin connector for the Raspberry Pi 5 and a 15-pin connector for the camera module, so both ends are fixed and you do not choose between them.

What does the 200 mm length mean when the cable is installed?

It gives you 200 mm of flexible flat cable between the Pi 5 CSI port and the camera module, enough for most case layouts without excess slack.

Does the CSI interface limit the camera resolution or frame rate?

The cable simply carries the CSI signals between the 22-pin Pi 5 port and the 15-pin camera; any resolution or frame-rate limits come from the Pi 5 and camera module themselves, not the cable.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.