Seagate
Seagate Barracuda 7200.9 ST3200827AS 200GB 7200RPM SATA 3.5" internal hard drive
A 200 GB desktop hard drive spinning at 7200 RPM with a SATA 3 Gb/s interface and 8 MB cache
- 200 GB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers responsive file access and boot times
- 5" SATA 3 Gb/s interface connects directly to desktop motherboards
- 8 MB cache buffers frequent read and write operations
- New condition ensures full factory reliability from first power-on
200 GB SATA desktop drive
This 3.5 inch internal hard drive delivers 200 GB of storage on a SATA 3 Gb/s interface. It spins at 7200 RPM and includes an 8 MB cache buffer. The unit is supplied new and weighs 2.0 pounds.
Suits older desktops needing a direct SATA
Builders restoring legacy systems or expanding a vintage PC will find the native SATA connection a drop-in fit. Users who need more than 200 GB of space or a 6 Gb/s interface should look at larger or newer drives.
Deciding spec: 3 Gb/s SATA interface
The drive connects only through a first-generation SATA port running at 3 Gb/s. Motherboards limited to this link speed will work without adapters, while boards with only 6 Gb/s ports may negotiate down but offer no throughput gain.
Poudarki
- 200 GB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers responsive file access and boot times
- 5" SATA 3 Gb/s interface connects directly to desktop motherboards
- 8 MB cache buffers frequent read and write operations
- New condition ensures full factory reliability from first power-on
Specifikacije
Za ta izdelek še ni objavljenih specifikacij.
Vprašanja o tem izdelku
What throughput limit appears first during sustained transfers on the SATA 3Gb/s link?
The SATA 3Gb/s interface sets the theoretical ceiling for sustained data movement on this drive.
How much heat or noise does the 7200 RPM mechanism produce when running continuously?
The 7200 RPM spindle and 2.0 pound chassis generate typical desktop drive heat and audible seek noise under all-day operation.
Which host connector must the system already provide for this 3.5" SATA drive?
A standard 3.5" SATA data port and matching power connector are required on the motherboard or controller.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
