Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 3.5 inch bare hard drive with green circuit board visible

Seagate

Seagate ST31000520AS 1TB 5900 RPM 32MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-11GV-78ADT MPN ST31000520AS

A 1 TB 3.5-inch desktop drive spinning at 5900 RPM with 32 MB cache and a SATA 3.0Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity1TB
  • RPM5900 RPM
  • Cache32MB
  • Average Latency5.1ms
  • 1 TB storage capacity for desktop systems
  • 5900 RPM spindle speed reduces power draw
  • 32 MB cache improves data access speed
  • SATA 3.0 Gb/s interface for broad compatibility
  • 5 inch form factor fits standard drive bays

1 TB SATA desktop drive

The Seagate BarraCuda LP ST31000520AS is a 3.5 inch internal hard drive with 1 TB capacity, 5900 RPM spindle speed and 32 MB cache. It connects over a SATA 3.0 Gb/s interface and is supplied as a bare drive. The low-power design targets desktop systems that prioritise reduced energy draw over peak throughput.

Low power and cooler running

The drive consumes up to 50 percent less power than standard desktop models, which lowers heat output and can reduce component stress over time. Average latency is 5.1 ms at the rated spindle speed. The unit has been erased to DoD 5220.22 M compliance and tested functional; up to 25 bad sectors may be present.

Upgrade from smaller or hotter drives

This drive replaces lower-capacity desktop disks or higher-power units where a cooler, quieter 1 TB volume is preferred. The jump is worthwhile when the system can accept a SATA 3.0 Gb/s device and does not require the faster access times of solid-state storage. It is not suited for workloads demanding sustained high transfer rates or enterprise-grade reliability.

Poudarki

  • 1 TB storage capacity for desktop systems
  • 5900 RPM spindle speed reduces power draw
  • 32 MB cache improves data access speed
  • SATA 3.0 Gb/s interface for broad compatibility
  • 5 inch form factor fits standard drive bays

Specifikacije

BrandSeagate
SeriesBarraCuda LP
ModelST31000520AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity1TB
RPM5900 RPM
Cache32MB
Average Latency5.1ms
FeaturesImportant Warranty Information
This product is end-of-sale and no longer warranted by the manufacturer. Instead, warranties this product for one year from date of purchase. If you require warranty service after thirty days, please contact Customer Service, not the manufacturer.
The Seagate Barracuda LP drive is designed to meet a growing need in the market today—a low-power, whisper-quiet, entry-level drive that delivers. This drive family has leading performance and is the perfect entry-level drive.
Super-low power consumption in every power mode
Cool drives provide long-lasting ben
Form Factor3.5"
Teža pošiljke0.64 kg
Velikost pošiljke148 × 103 × 27 mm

Vprašanja o tem izdelku

How do I install the ST31000520AS 3.5" SATA drive and what step is often missed?

Mount the 3.5" drive in a bay, attach a SATA data cable to the motherboard and a SATA power connector from the PSU, then initialise and format the 1TB volume in Disk Management — the step often missed is creating the partition and file system after the drive appears in BIOS.

What maintenance or replacement will this 5900 RPM drive need later?

As a mechanical drive, the ST31000520AS may develop bad sectors over time; the supplier notes up to 25 bad sectors can be present on used units, so monitor SMART health and replace the drive if reallocated sector counts rise.

What limit appears first under sustained use on this 32MB cache SATA 3.0Gb/s drive?

The 5900 RPM spindle speed and 5.1ms average latency set the sustained throughput ceiling, so long sequential workloads will hit the mechanical transfer limit before the SATA 3.0Gb/s interface saturates.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.