Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 3.5 inch SAS hard drive with circuit board visible

Seagate

Seagate ST6000NM0095 6TB 7200RPM 12Gbps 256MB 3.5" SAS internal hard drive

SKU CH-YCMD-DNZYK

A 6 TB 3.5-inch SAS drive spins at 7200 RPM with a 256 MB cache for high-capacity server storage

  • 6 TB capacity stores large data sets
  • 7200 RPM spindle speed enables fast sequential access
  • 12 Gb/s SAS interface supports high-throughput workloads
  • 256 MB cache buffers bursts for smoother performance
  • 5-inch form factor fits standard drive bays

Product identity

This Seagate ST6000NM0095 is a 6TB enterprise-class hard drive with a 7200RPM spindle speed and a 12Gbps SAS interface. It fits a standard 3.5in bay and provides 256MB of cache for sustained throughput. The unit is supplied new with zero hours on the motor.

Who this suits

It suits server and storage-array builders who need a 12Gbps SAS connection and 7200RPM performance in a 3.5in form factor. Buyers who require a different interface protocol or a smaller physical form factor should look elsewhere.

Deciding specification

The single specification that decides fit is the 12Gbps SAS interface; the drive will only operate in a backplane or controller that supports this exact signalling rate and connector type.

Poudarki

  • 6 TB capacity stores large data sets
  • 7200 RPM spindle speed enables fast sequential access
  • 12 Gb/s SAS interface supports high-throughput workloads
  • 256 MB cache buffers bursts for smoother performance
  • 5-inch form factor fits standard drive bays

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What controller or backplane do I need to connect the 12Gb/s SAS interface?

A 12Gb/s SAS HBA, RAID card, or backplane with matching SAS connectors is required.

Will the 3.5" form factor fit in my existing drive bays and caddies?

Yes, the 3.5" dimensions match standard enterprise bays and hot-swap caddies designed for 3.5" SAS drives.

How can I confirm the 7200RPM spindle speed and 256MB cache are active after installation?

Check the drive's reported rotational speed and buffer size in your RAID controller BIOS or OS disk utility; they should read 7200RPM and 256MB.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.