Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 120 mm square case fan with transparent blades and RGB lighting ring, four rubber corner pads, 3-pin power connector

segotep

segotep GX-PLUS RGB 120mm case fan

SKU CH-B2DW-YA04C

A 120 mm case fan with hydro bearing, 55-60 CFM airflow and 20-25 dBA noise, plus addressable RGB lighting that syncs via 5 V motherboard header

  • TypeCase Fan
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM
  • Air Flow55-60 CFM
  • Noise Level20 - 25 dBA
  • Power Connector3 Pin
  • Hydro bearing keeps noise between 20 and 25 dBA
  • 55 to 60 CFM airflow moves heat from CPU coolers
  • 5V RGB syncs lighting with motherboard software
  • Nine aerodynamic blades and rubber pads cut vibration
  • 3‑pin connector runs at up to 1600 RPM for strong cooling

Segotep GX-PLUS RGB 120mm fan

The Segotep GX-PLUS RGB is a 120 mm case fan designed for system builders who want addressable lighting and quiet airflow. It uses a hydro bearing and a nine-blade design to move air through chassis or radiator mounts. The fan connects via a 3-pin power connector and a 5 V RGB header for motherboard synchronisation.

Practical limits of the 3-pin and 5 V RGB interface

Speed control relies on voltage regulation from the motherboard header, so the fan runs up to its rated 1100 RPM with a tolerance of ten percent. Maximum airflow reaches 52.5 CFM at a static pressure of 0.96 mm H₂O. The 5 V RGB connection allows lighting sync with compatible boards but does not support 12 V RGB ecosystems.

Build quality and daily implications

Eight rubber pads on the frame corners dampen vibration against the case or radiator, helping keep operating noise below 28.5 dB(A). The fan draws 0.27 A at 12 V and includes a daisy-chainable 4-pin connector so multiple units can share a single header. Buyers who need PWM speed control or 12 V RGB compatibility should look elsewhere.

Poudarki

  • Hydro bearing keeps noise between 20 and 25 dBA
  • 55 to 60 CFM airflow moves heat from CPU coolers
  • 5V RGB syncs lighting with motherboard software
  • Nine aerodynamic blades and rubber pads cut vibration
  • 3‑pin connector runs at up to 1600 RPM for strong cooling

Specifikacije

BrandSegotep
ModelGX-PLUS RGB
TypeCase Fan
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow55-60 CFM
Noise Level20 - 25 dBA
Power Connector3 Pin
LEDRGB
FeaturesPC Fan Feature 1: 120mm RGB FanPC Fan Feature 2: PC Fan for CPU Cooler CoolingPC Fan Feature 3: Cooler Fan 120mmPC Fan Feature 4: CPU Cooling FanPC Fan Feature 5: Support Aura Sync Case FanPC Fan Feature 6: Support Control Fan SpeedPC Fan Feature 7: Computer Case FansPC Fan Feature 8: 120mm Cooling Fan RGBPC Fan Feature 9: Cooler ARGB Case Fan
Package ContentsCASE FAN *N

Vprašanja o tem izdelku

How many fans come in each pack option?

The product is sold in packs of 1, 3 or 5 fans so you can match the number of mounts in your case.

What airflow will I actually see at the rated 1100 RPM?

At the rated 1100 RPM the fan delivers 52.5 CFM, which is the measured maximum air volume for this model.

What does the 4-pin interface limit for lighting control?

The D-4Pin connector carries 5 V addressable RGB, letting the fan sync with motherboard software that supports 5 V RGB headers.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.