Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two 300mm addressable RGB LED strips with magnetic backing and adhesive tape

Silverstone

Silverstone SST-LS03 300mm addressable RGB LED strip case accessory

SKU CH-ZG4T-6BH5S MPN SST-LS03

A 300 mm addressable RGB strip with 12 LEDs, magnetic backing and adhesive tape for flexible case lighting

  • TypesLighting & Decor
  • ColorsMulti-Color
  • Length300mm
  • SpecificationsMaterial 12 pcs addressable RGB LED with magnetic strip and
  • FeaturesDisplays any color by use of an addressable RGB LED control
  • Addressable RGB lets you choose any colour via motherboard or control box
  • 300 mm strips with 12 LEDs each draw 3 W at 5 V
  • Magnetic backing plus adhesive tape gives flexible mounting inside the case
  • Daisy-chain support lets you link multiple strips from one header
  • Kit includes two strips, a motherboard cable and a splitter for easy setup

What it is

The Silverstone SST-LS03 is a pair of 300mm addressable RGB LED strips designed for PC case lighting. Each strip contains 12 addressable LEDs and draws 3W at 5V. The kit includes a motherboard connect cable and a splitter cable for daisy-chaining.

How it fits

The strips attach via built-in magnetic strips and adhesive tape, offering flexible placement inside steel chassis or on non-magnetic surfaces. They connect to a standard 3-pin 5V addressable RGB header or a compatible control box. The included splitter allows multiple strips to run from a single header.

Upgrade path

This kit replaces basic single-colour LED strips or cold-cathode tubes that cannot change colour per LED. The jump is worth it when you want per-LED colour control and synchronisation with motherboard software. Builders needing longer continuous runs beyond the daisy-chain limit should look at higher-density strips.

Poudarki

  • Addressable RGB lets you choose any colour via motherboard or control box
  • 300 mm strips with 12 LEDs each draw 3 W at 5 V
  • Magnetic backing plus adhesive tape gives flexible mounting inside the case
  • Daisy-chain support lets you link multiple strips from one header
  • Kit includes two strips, a motherboard cable and a splitter for easy setup

Specifikacije

BrandSilverstone
ModelSST-LS03
TypesLighting & Decor
ColorsMulti-Color
Length300mm
SpecificationsMaterial 12 pcs addressable RGB LED with magnetic strip and adhesive tape
Pin definition:
+5V, D, G*
+5V, D, NP, G*
Included Parts:
2 x Addressable RGB LED strip
1 x Motherboard connect cable**
1 x Splitter cable
Length: 300mm
Wattage: 3W (5V, 0.6A)
Tandem limits: Depend on controller
Remark:
* Please check the control box and motherboard pin header that you want to connect are the same as LS03’s pin definition.
** Included Motherboard connect cable supports SilverStone’s addressable RGB 3pin connectors and other market standard addressable RGB 3pin (three pin in four pin housing) co
FeaturesDisplays any color by use of an addressable RGB LED control box or capable motherboard
Built-in magnetic strip and adhesive tape provides more installation freedom
Supports daisy chaining multiple light strips
Teža pošiljke0.18 kg
Velikost pošiljke406 × 51 × 25 mm

Vprašanja o tem izdelku

How many strips can I daisy-chain before the 5 V header current limit is reached?

Each strip draws .6 A at 5 V, so the total number depends on the motherboard or controller header rating; check its maximum current before adding more than two strips.

How much heat does the 3 W strip produce during continuous operation?

The strip consumes 3 W total, so it adds only a small amount of warmth inside the case and does not require active cooling.

Which motherboard header pin-out is required for the included connect cable?

The cable fits standard addressable RGB 3-pin headers in a 4-pin housing (+5V, D, G) and SilverStone’s own 3-pin layout; verify your board matches the +5V, D, G pin definition before connecting.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.