Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green rectangular PCB adapter with gold 50-pin IDE connector and CompactFlash slot, jumper block visible

SMUGDESK

SMUGDESK CF to 50Pin 1.8" IDE Hard Drive Adapter

SKU CH-MCX1-DDKES

Converts a Compact Flash card into a 50-pin 1.8" IDE drive with Master/Slave jumper and gold-plated contacts for silent, bootable upgrades

  • Turns a CF card into a 1.8" IDE drive
  • Jumper selects Master or Slave mode
  • Gold-plated pins keep signals stable
  • Boots legacy gear without extra drivers
  • Silent solid-state swap for mechanical HDDs

CF to 50Pin 1.8" IDE Adapter

This adapter converts a standard Compact Flash memory card into a 50Pin 1.8 inch IDE hard drive replacement. It targets owners of legacy notebooks, industrial control systems or POS terminals that rely on the 50Pin 1.8" IDE interface. The board includes a Master/Slave jumper for flexible system recognition. No driver installation is required and boot support is provided.

Who This Suits

It suits technicians upgrading older equipment where a mechanical 1.8 inch IDE drive has failed or become unreliable. The solid-state CF solution eliminates moving parts, vibration and noise. Buyers who need to connect SD, TF or other card formats should look elsewhere as the adapter only accepts standard CF cards. Systems lacking a 50Pin 1.8" IDE connector cannot use this product.

Critical Specification

The single deciding specification is the 50Pin 1.8 inch IDE connector on the host device. Verify that your equipment presents exactly this interface before purchase. The CF card itself is not included and must be sourced separately.

Poudarki

  • Turns a CF card into a 1.8" IDE drive
  • Jumper selects Master or Slave mode
  • Gold-plated pins keep signals stable
  • Boots legacy gear without extra drivers
  • Silent solid-state swap for mechanical HDDs

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What does the 50-pin 1.8-inch IDE interface cap in practice?

The adapter connects a standard Compact Flash card to a 50-pin 1.8-inch IDE port, letting the system treat the card as a bootable IDE drive with Master or Slave jumper selection.

What physical space and connector does the adapter need to fit?

It plugs directly into a 50-pin 1.8-inch IDE socket and accepts a standard Compact Flash card; the board itself is a compact PCB with gold-plated pins.

How is it installed, and what step do people often miss?

Insert the CF card, set the Master/Slave jumper to match the system requirement, then plug the adapter into the 50-pin IDE slot — no drivers needed.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.