SMUGDESK
SMUGDESK M.2 NVMe to USB 3.1 Gen 2 Adapter
Converts M-Key NVMe SSDs into a portable USB Type-A drive with 10Gbps transfer speed and driver-free setup
- Up to 10Gbps transfers via USB 3.1 Gen 2 bridge chip
- Fits M-Key NVMe SSDs 2230 2242 2260 2280 from major brands
- Driver-free plug-and-play with hot-swap support for instant use
- Slim USB Type-A design turns any NVMe SSD into portable storage
- Works on Windows macOS Linux with stable 24/7 operation
M.2 NVMe to USB 3.1 Gen 2 Adapter
This adapter converts an M-Key NVMe SSD into a portable external drive via a USB Type-A port. It suits users who want fast access to internal solid-state storage without opening a computer case. The driver-free design works immediately on Windows, macOS and Linux.
10Gbps transfer speed with M-Key NVMe SSDs
The USB 3.1 Gen 2 interface delivers up to 10Gbps bandwidth for rapid file transfers and system booting. It accepts M-Key NVMe modules in 2230, 2242, 2260 and 2280 form factors from major brands. Performance scales with the installed SSD; the bridge chip does not add overhead beyond the 10Gbps link limit.
Tool-free setup and broad OS support
A slim, lightweight PCBA enables plug-and-play operation with hot-swap capability for quick drive changes. No extra drivers or power adapters are required for 24/7 use. Compatibility covers Samsung 970/960 EVO/Pro, WD Black/SN series, Intel 600P/760P, Crucial P1/P2, Kingston A2000, ADATA SX8200Pro and Seagate BarraCuda drives.
Poudarki
- Up to 10Gbps transfers via USB 3.1 Gen 2 bridge chip
- Fits M-Key NVMe SSDs 2230 2242 2260 2280 from major brands
- Driver-free plug-and-play with hot-swap support for instant use
- Slim USB Type-A design turns any NVMe SSD into portable storage
- Works on Windows macOS Linux with stable 24/7 operation
Specifikacije
Za ta izdelek še ni objavljenih specifikacij.
Vprašanja o tem izdelku
Will my existing M-Key NVMe SSD in 2230, 2242, 2260 or 2280 form factor work with this adapter?
Yes, the adapter accepts all four M-Key NVMe lengths and uses a tool-free design so you can install your drive without extra hardware.
How can I verify the 10Gbps USB 3.1 Gen 2 link is active after plugging it in?
Check the OS device manager or system profiler; it should list the bridge at 10Gbps, and real-world transfers will approach that ceiling with a fast NVMe drive.
What comes in the box and what must I supply myself?
The package contains the USB Type-A bridge card only; you provide the M-Key NVMe SSD and any USB-A cable if your port needs one.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



