STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory
- Black
- 1 x 3.5" Drive to 5…
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
STARTECH
A plastic bracket that secures a 3.5in floppy drive into a 5.25in front bay with mounting screws and a black bezel
Model 1 x 3.5in (Front Bay)
Prečrtane različice obstajajo, vendar tukaj niso na voljo.
Option 1 x 5.25in
This plastic bracket converts a single 5.25in front bay so it can accept a 3.5in floppy drive. The open-faced black bezel gives a clean look while securing the drive with the included mounting screws. It is aimed at builders restoring or maintaining legacy systems that still use 3.5in floppy media.
The adapter occupies one 5.25in bay and requires no additional power or data connections beyond the drive itself. It frees the builder from the fixed 3.5in floppy bay location dictated by the case layout, allowing the drive to sit higher or lower in the chassis as preferred. Four mounting screws are supplied for installation.
As a passive plastic bracket it draws no power and adds no active cooling noise. The open design allows the case airflow to reach the installed drive without restriction. Operating temperatures and acoustic levels remain entirely dependent on the drive and the case ventilation.
| Brand | StarTech.com |
|---|---|
| Model | BRACKETFDBK |
| Color | Black |
| Conversion Tray | 1 x 3.5" Drive to 5.25" Bay |
| Specifications | Dimension: 1.13" x 5.75" x 5.25" (H x L x W) |
| Features | This plastic, floppy-drive adapter bracket lets you install a 3.5in floppy drive into a 5.25in bay. A simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout), the floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives. Mount almost any 3.5in device into a standard 5.25in front bay. Install a 3.5in hard drive into a single 5.25in front bay 3.5 to 5.25 Adapter Hard Drive Bracket Drive Bay Adapter -5.25 |
| Teža pošiljke | 0.14 kg |
| Velikost pošiljke | 170 × 152 × 48 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The bracket measures 1.1 in high, 5.3 in wide and 5.7 in deep, matching a standard 5.25 in front bay so most case doors close normally.
The adapter has no moving parts or electronics; it adds no heat or noise beyond what the installed drive produces.
Four mounting screws are included; you only need to provide the 3.5 in floppy drive you want to install.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?