Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
A 1kg spool of natural 2.85mm nylon filament

Taulman 3D

Taulman 3D Nylon 230 Filament 2.85mm 1kg Natural

SKU CH-CPMY-5C8RD

Nylon 6 filament prints at 228–235 °C on ambient beds for light-load gears, housings and covers

  • ColorNatural
  • TypeFilament
  • Prints at low 228–235 °C on cold beds
  • Standard Nylon 6 with no chemical additives
  • High 417 % elongation for flexible parts
  • Strong 4980 PSI tensile for functional gears
  • 85 mm diameter suits compatible 3D printers

Filament for Cold-Bed Printers

Taulman 3D Nylon 230 is a standard Nylon 6 filament engineered for 3D printers with cold print beds and lower temperature capabilities. It prints between 228 and 235 Celsius with a bed at ambient temperature. The 2.85 mm diameter spool weighs 1 kg and comes in a natural bright white colour. No chemical additives are used in this material.

Suitability and Limits

This filament suits makers producing light-load gears, fan blades, housings, phone covers, protective enclosures or cosmetics containers. It offers tensile strength of 4980 PSI and elongation of 417 percent. Buyers needing carbon-fibre reinforcement or high-temperature resistance above 238 Celsius should look at other materials.

Deciding Specification

The printing temperature range of 228 to 235 Celsius is the single figure that determines compatibility. If your printer cannot reach or hold this range, the filament will not work. Check your hardware specifications against these numbers before purchasing.

Poudarki

  • Prints at low 228–235 °C on cold beds
  • Standard Nylon 6 with no chemical additives
  • High 417 % elongation for flexible parts
  • Strong 4980 PSI tensile for functional gears
  • 85 mm diameter suits compatible 3D printers

Specifikacije

Brandtaulman3d
ColorNatural
TypeFilament

Vprašanja o tem izdelku

What printing temperature range does the Nylon 230 filament require?

The filament prints at 228–235 °C with a bed at ambient temperature.

What filament diameter must the printer accept for this spool?

It uses 2.85 mm diameter filament, so the extruder must support that size.

How should the filament be prepared before printing to avoid moisture issues?

Dry the spool before use and store it sealed with desiccant, because nylon absorbs water quickly.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.