Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Ten natural nylon filament spools on small reels

Taulman 3D

Taulman 3D Nylon 230 Filament 2.85mm 1lb Natural 10 pack

SKU CH-6W3H-ATMVS

Ten spools of 2.85 mm natural Nylon 230 filament print at 228–235 °C on unheated beds with 4980 PSI tensile strength and 417 % elongation

  • ColorNatural
  • TypeFilament
  • Prints at 228–235 °C without a heated bed
  • Standard Nylon 6 with no chemical additives added
  • High 417 % elongation for flexible, durable parts
  • 4980 PSI tensile strength suits functional prototypes
  • Ten 1 lb spools of 2.85 mm natural filament

Nylon 230 10-pack for cold beds

This pack contains ten spools of Taulman 3D Nylon 230 filament in natural colour. Each spool weighs 1 lb and uses a 5-inch diameter. The material is a standard Nylon 6 formulation developed for printers with cold print beds and lower temperature capabilities. No chemical additives are included in the filament.

Suited for low-temp Nylon 6 printing

Makers who need a nylon that prints between 228 °C and 235 °C on an ambient bed will find this filament appropriate. Typical applications include light-load gears, fan blades, housings, phone covers, protective enclosures and cosmetic containers. Builders whose printers require a heated bed above ambient temperature or who need a different filament diameter should look at other materials.

2.85 mm diameter decides fit

The filament size is 2.85 mm, which determines whether it matches the printer’s extruder and Bowden system. Printing temperature ranges from 228 °C to 235 °C with a bed temperature at ambient. Tensile strength is 4980 PSI and elongation at break is 417 %.

Poudarki

  • Prints at 228–235 °C without a heated bed
  • Standard Nylon 6 with no chemical additives added
  • High 417 % elongation for flexible, durable parts
  • 4980 PSI tensile strength suits functional prototypes
  • Ten 1 lb spools of 2.85 mm natural filament

Specifikacije

Brandtaulman3d
ColorNatural
TypeFilament

Vprašanja o tem izdelku

Will the 2.85mm Nylon 230 filament work on my printer that only has a cold bed and lower temperature capability?

Yes, Nylon 230 was developed specifically for systems with cold print beds and lower temp capabilities, printing at 228°C to 235°C with the bed at ambient temperature.

How can I verify the filament is printing correctly after loading the first spool?

A successful print will show strong layer adhesion at the 228°C to 235°C range, with parts achieving 4980 PSI tensile strength and 417% elongation when printed on an ambient bed.

What exactly comes in the 10-pack box and is there anything else I need to buy to start printing?

The box contains ten 1 lb spools of 2.85mm Natural Nylon 230 filament on 5-inch spools; no chemical additives are included, and the filament prints on an ambient bed so no heated bed upgrade is required.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.