Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

VisionTek

VisionTek 900449 4GB 204-Pin DDR3 SO-DIMM 1333 (PC3 10600) laptop RAM

SKU CH-AXE2-FWNKH MPN 900449

4GB DDR3 SO-DIMM laptop memory running at 1333MHz with CL9 latency and 1.50V operation

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity expands multitasking headroom for everyday workloads
  • DDR3 1333 (PC3 10600) delivers up to 10.6Gbps bandwidth per channel
  • CL9 CAS latency ensures smooth system response
  • 50V standard voltage matches JEDEC specification for broad compatibility
  • 204-pin SO-DIMM form factor fits standard laptop memory slots

4GB DDR3 SO-DIMM 1333MHz Upgrade

This VisionTek 900449 module adds 4GB of DDR3 memory to a laptop that uses 204-pin SO-DIMM slots. It runs at 1333MHz with a PC3-10600 rating and operates at the standard 1.50V. The stick is unbuffered and non-ECC with a CAS latency of CL9.

Ideal for Older Laptop Maintenance

The module suits owners of legacy notebooks that specify DDR3 1333MHz SO-DIMM memory and have a free 204-pin slot. It is not for systems that require registered or ECC memory, nor for machines needing a higher density than 4GB per slot. Buyers whose devices demand a different DDR generation or a different pin count should look elsewhere.

204-Pin DDR3 1333MHz Form Factor

Compatibility hinges on the 204-pin DDR3 SO-DIMM interface running at 1333MHz. If the laptop’s service manual or BIOS lists PC3-10600 unbuffered non-ECC memory at 1.50V, this module will fit and function. A different pin layout, voltage, or DDR generation means the part cannot be used.

Poudarki

  • 4GB capacity expands multitasking headroom for everyday workloads
  • DDR3 1333 (PC3 10600) delivers up to 10.6Gbps bandwidth per channel
  • CL9 CAS latency ensures smooth system response
  • 50V standard voltage matches JEDEC specification for broad compatibility
  • 204-pin SO-DIMM form factor fits standard laptop memory slots

Specifikacije

BrandVisiontek
Model900449
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Teža pošiljke0.02 kg
Velikost pošiljke165 × 88 × 10 mm

Vprašanja o tem izdelku

Does the 204-pin SO-DIMM fit a standard DDR3 laptop slot?

Yes, the 204-pin DDR3 SO-DIMM form factor matches the standard DDR3 laptop memory slot.

What is the correct way to seat the module so the side clips engage?

Align the notch on the module with the key in the slot, press the module in evenly until the gold contacts are no longer visible, then push down until the side clips snap into the notches.

Will the 1.50 V modules need a voltage adjustment later?

The modules run at the JEDEC standard 1.50 V; no voltage adjustment is required for the life of the memory.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.