Vszerda
Vszerda X550-10G-2T 10Gb dual RJ45 PCIe 3.0 x4 network card
Dual-port 10GbE RJ45 adapter with Intel X550-AT2 controller, PCIe 3.0 x4, low-profile and full-height brackets included
- StandardsEthernet
- Speed10 gigabits_per_second
- ConnectorsEthernet
- FeaturesDesktop
- Dimensions8.8 in x 1.2 in x 5.7 in
- Dual RJ45 ports deliver 10 GbE, 5 GbE, 2.5 GbE, 1 GbE and 100 Mb speeds
- PCIe 3.0 x4 interface works in x4, x8 or x16 slots and is backward compatible with PCIe 1.1 and 2.0
- Intel X550-AT2 controller provides QoS, SR-IOV, DPDK, iSCSI, FCoE, Jumbo Frames, TCP offload, DCB, Auto-MDIX, VMDq and PXE
- Drivers available for Windows 7 through 11, Server 2008 through 2019, Linux, FreeBSD and VMware ESXi 6 through 8
- Includes both low-profile and full-height brackets for standard and slim chassis
Dual-port 10GbE server adapter
This PCIe 3.0 x4 network card uses the Intel X550-AT2 controller to provide two RJ45 ports for copper-based 10 Gigabit Ethernet. It targets administrators upgrading rack-mount or tower servers that need high-throughput links over existing Cat6a or Cat7 cabling. Low-profile and full-height brackets are included so the same card fits standard and slim chassis.
Speed headroom from 100 Mb to 10 Gb
Each port auto-negotiates down through 5 GbE, 2.5 GbE, 1 GbE and 100 MbE, letting the card serve mixed-speed segments without extra hardware. The x4 PCIe 3.0 interface supplies enough bandwidth for line-rate traffic on both ports simultaneously. Throughput drops only when the host bus is limited to PCIe 1.1 or 2.0 speeds.
Passive cooling in typical server airflow
The card ships without an active fan and relies on chassis airflow across its heatsink; in normal rack environments it runs silently. Power draw stays within the PCIe slot specification, so no auxiliary connector is required. Installers should verify that their enclosure provides adequate front-to-back airflow for sustained loads.
Poudarki
- Dual RJ45 ports deliver 10 GbE, 5 GbE, 2.5 GbE, 1 GbE and 100 Mb speeds
- PCIe 3.0 x4 interface works in x4, x8 or x16 slots and is backward compatible with PCIe 1.1 and 2.0
- Intel X550-AT2 controller provides QoS, SR-IOV, DPDK, iSCSI, FCoE, Jumbo Frames, TCP offload, DCB, Auto-MDIX, VMDq and PXE
- Drivers available for Windows 7 through 11, Server 2008 through 2019, Linux, FreeBSD and VMware ESXi 6 through 8
- Includes both low-profile and full-height brackets for standard and slim chassis
Specifikacije
| Brand | H!Fiber.com |
|---|---|
| Part Number | X550-10G-2T |
| Standards | Ethernet |
| Speed | 10 gigabits_per_second |
| Connectors | Ethernet |
| Features | Desktop |
| Dimensions | 8.8 in x 1.2 in x 5.7 in |
Vprašanja o tem izdelku
Will the PCIe 3.0 x4 interface work in my older server that only has PCIe 2.0 slots?
Yes, the card is backward compatible with PCIe 1.1 and 2.0 and fits x4, x8, or x16 slots, so it will operate in a PCIe 2.0 slot at the slot's maximum speed.
How can I verify the Intel X550-AT2 controller is recognised and the dual RJ45 ports are linking at 10GbE after installation?
Check Device Manager or run lspci to confirm the Intel X550-AT2 appears, then ensure each port shows a 10GbE link speed and the driver version matches the OS release from Intel's site.
Does the box include both mounting brackets or do I need to buy a low-profile bracket separately for my slim chassis?
The package includes both a full-height bracket and a low-profile bracket, so no extra bracket purchase is required for standard or slim systems.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
Extreme Networks 16804 8-port PoE+ managed network switch
- ethernet
- Managed
ZyXEL XMG2230-28HP 24-port multi-gig PoE++ network switch
- 24 x Multi-Gigabit…
- Gigabit Ethernet 2.…



