Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small transparent square fan 30mm frame 7mm thick two wire connector

Zyvpee

Zyvpee 3007 12 30mm sleeve bearing 12V transparent case fan

SKU CH-BTBD-Z43WF

A 30mm sleeve-bearing case fan running at 12V with a transparent frame and 25 to 30 dBA noise output

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeSleeve bearing
  • Noise Level25 - 30 dBA
  • Power Connector2 Wires
  • Ultra-compact 30 mm frame fits tight 3D-print builds
  • Sleeve bearing runs at 25 to 30 dBA for quiet operation
  • 12 V two-wire power keeps wiring simple
  • Transparent housing shows internal airflow clearly
  • 3007 12 series designed for CPU-cooler compatibility

Compact 30 mm transparent fan

This Zyvpee 3007 12 case fan measures 30 mm square by 7 mm thick and runs on 12 V through a two-wire DC connector. Its transparent frame and sleeve bearing suit small-form-factor builds and custom 3D-printed GPU shrouds where space is at a premium. The fan delivers a quiet 25 to 30 dBA noise level without any LED lighting. It is aimed at hobbyists who need a tiny, unobtrusive airflow source for tight clearance zones.

Replaces stock 30 mm coolers

The unit serves as a direct drop-in for noisy or failed 30 mm fans on CPU coolers or experimental graphics-card ducts. The jump is worthwhile when the original fan exceeds 30 dBA or when a transparent blade matches a see-through build theme. Builders who require PWM speed control or a three- or four-pin header will not find that functionality here. The two-wire design limits automatic motherboard regulation to voltage control only.

Limited by two-wire DC interface

The 12 V two-wire connection provides power and ground but no tachometer or PWM signal, so the motherboard cannot monitor RPM or adjust duty cycle. Speed changes rely solely on varying the supply voltage, which may not be supported by all fan headers. The sleeve bearing offers quiet operation at low speeds but can wear faster than ball bearings in continuous high-RPM use. No mounting hardware or adapters are included in the package.

Poudarki

  • Ultra-compact 30 mm frame fits tight 3D-print builds
  • Sleeve bearing runs at 25 to 30 dBA for quiet operation
  • 12 V two-wire power keeps wiring simple
  • Transparent housing shows internal airflow clearly
  • 3007 12 series designed for CPU-cooler compatibility

Specifikacije

Series3007 12
Model3007 12
TypeCase Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeSleeve bearing
Noise Level25 - 30 dBA
Power Connector2 Wires
ColorTransparent
LEDNon-LED
FeaturesDC square Cooler
Dimensions30*07mm

Vprašanja o tem izdelku

Will the 30mm square frame with 7mm depth fit my CPU cooler mounting holes?

The fan measures 30mm by 30mm with a 7mm thickness, so verify your cooler uses the same 30mm hole spacing before mounting.

How do I connect the two-wire lead to a standard 12V fan header without reversing polarity?

Match the red wire to the 12V pin and the black wire to ground on the header; the connector is not keyed, so double-check orientation before powering on.

When should I plan to replace the sleeve bearing in this 3007 12 model?

Sleeve bearings typically last several years at 25 to 30 dBA; replace the fan once you hear increased rattling or notice reduced airflow.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.