Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 80mm square case fan with hydraulic bearing and 4-pin PWM connector

Zyvpee

Zyvpee AD08012XX257B01 80mm 25mm PWM hydraulic case fan

SKU CH-2R47-88AM6

An 80 mm hydraulic-bearing case fan with 25 mm thickness, PWM control and a 4-pin 12 V connector

  • TypeCase Fan
  • Bearing TypeHydraulic
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • PWM speed control adapts cooling to demand
  • Hydraulic bearing reduces friction for quieter operation
  • 80 mm frame fits compact case layouts
  • 25 mm thickness suits standard mounting points
  • 12 V 0.38 A draw keeps power use low

80mm PWM hydraulic case fan

This 80mm case fan uses a hydraulic bearing and a four pin PWM connector for speed control. It runs on 12 volts and draws 0.38 amps. The black frame measures 80 by 25 millimetres and has no LED lighting.

Installation notes

The standard four pin connector fits most motherboard headers and fan controllers. Mounting holes match common 80mm spacing so no adapters are required. Hydraulic bearings reduce friction but can develop noise if the fan is mounted horizontally with the label facing down.

Compatibility check

Verify that your case or heatsink has an 80mm mounting grid and at least 25mm clearance. Confirm the motherboard header supplies 12 volts and supports PWM control for automatic speed curves. Ensure the four pin plug orientation matches the header key.

Poudarki

  • PWM speed control adapts cooling to demand
  • Hydraulic bearing reduces friction for quieter operation
  • 80 mm frame fits compact case layouts
  • 25 mm thickness suits standard mounting points
  • 12 V 0.38 A draw keeps power use low

Specifikacije

Brand3ccooler.com
SeriesAD08012XX257B01
ModelAD08012XX257B01
TypeCase Fan
Bearing TypeHydraulic
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions80*25mm

Vprašanja o tem izdelku

How do I confirm the 80mm PWM fan is running correctly after installation?

Connect the 4-pin connector to a PWM header, then check BIOS or monitoring software for a speed reading that changes with temperature.

What comes in the box and what must I purchase separately?

The box contains the 80mm hydraulic-bearing fan with a 4-pin PWM cable; no mounting screws or adapters are included.

Which version of the AD08012XX257B01 should I choose for a 12 V 0.38 A header?

This single model is rated for DC 12 V 0.38 A and fits an 80 mm × 25 mm mounting pattern.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.