Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 80mm square axial case fan 32mm thick three-pin ball bearing

Zyvpee

Zyvpee EFB0812EHF R00 80x32mm 12V .68A 3-pin ball bearing case fan

SKU CH-BSCJ-0YHJZ

An 80 mm DC axial case fan with ball bearings, 3-pin connector, 12 V 0.68 A draw and 60-65 CFM airflow at 3500-3999 RPM

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM3500-3999 RPM
  • Air Flow60-65 CFM
  • Power Connector3 Pin
  • High airflow up to 65 CFM for effective case cooling
  • 12 V 0.68 A ball-bearing motor spins 3500-3999 RPM
  • Compact 80 x 32 mm frame fits tight 80 mm mounts
  • Standard 3-pin DC connector works with most motherboards
  • Black non-LED design keeps builds clean and professional

80mm DC Axial Case Fan

This Zyvpee EFB0812EHF R00 is a new 80 by 32 millimetre case fan that runs on 12 volts DC and draws 0.68 amps. It uses a three-pin power connector and a ball-bearing motor rated for 3500 to 3999 RPM. The black, non-LED frame delivers 60 to 65 CFM of airflow for standard chassis cooling.

Suits tight 80mm mounts; not for PWM or larger bays

System builders who need a slim 32mm profile in an 80mm mounting pattern will find this unit fits directly. The three-pin DC design provides voltage-based speed control only. Buyers requiring four-pin PWM regulation, larger frame sizes, or any integrated lighting should look elsewhere.

3500 to 3999 RPM ball-bearing motor

The fixed speed range of 3500 to 3999 RPM determines the acoustic and thermal profile of this cooler. At 60 to 65 CFM it moves enough air for typical component cooling, while the ball bearing supports continuous operation. Match the 12 volt 0.68 amp draw to your header limits before installing.

Poudarki

  • High airflow up to 65 CFM for effective case cooling
  • 12 V 0.68 A ball-bearing motor spins 3500-3999 RPM
  • Compact 80 x 32 mm frame fits tight 80 mm mounts
  • Standard 3-pin DC connector works with most motherboards
  • Black non-LED design keeps builds clean and professional

Specifikacije

SeriesEFB0812EHF
ModelEFB0812EHF
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM3500-3999 RPM
Air Flow60-65 CFM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions80*32mm

Vprašanja o tem izdelku

How much noise and heat will the 3500-3999 RPM ball-bearing 12V 0.68A fan add when running all day?

At 3500-3999 RPM the 80x32mm ball-bearing fan moves 60-65 CFM on 12V 0.68A power; expect audible airflow noise and modest case-temperature rise under continuous load.

What power header must my motherboard or controller already have for the 3-pin connector?

A standard 3-pin 12V DC fan header is required; the fan draws 0.68A so the header must supply at least that current.

Will the 80x32mm 3-pin ball-bearing fan fit and cool alongside older 80mm case fans I keep?

The fan uses the common 80mm mounting pattern and 3-pin 12V power, so it installs in the same screw holes and headers as other 80mm fans.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.