Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

Zyvpee

Zyvpee KD1209PTS2 90×25 mm 12 V 1.7 W 2-wire case fan

SKU CH-C07E-CGYRT

A 90 mm sleeve-bearing case fan running up to 1600 RPM on 12 V and 1.7 W with a two-wire power connector

  • TypeCase Fan
  • Bearing TypeSleeve Bearing
  • RPM<1600 RPM
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • 90 × 25 mm frame fits standard 90 mm mounting points
  • 12 V 1.7 W draw keeps power load low
  • Under 1 600 RPM sleeve bearing runs quietly
  • 2-wire connector plugs straight into 12 V headers
  • Black non-LED design suits low-profile builds

Compact 90 × 25 mm 12 V case fan

The Zyvpee KD1209PTS2 is a 90 mm square frame fan with a 25 mm thickness, designed for direct 12 V DC operation. It draws 1.7 W and spins below 1600 RPM using a sleeve bearing, providing basic airflow for tight chassis or heatsink mounting. The two-wire power connector supplies voltage without speed reporting or PWM control.

Suits builds needing a slim 90 mm replacement

This unit fits any bracket cut for the 90 × 25 mm footprint and a two-pin 12 V header. It is not suited for systems requiring PWM speed regulation, tachometer feedback, or higher static pressure than a sub-1600 RPM sleeve-bearing design can deliver. Builders who need LED lighting or a different bearing type should look elsewhere.

Critical spec: 90 × 25 mm frame

The physical envelope of 90 mm by 25 mm and the two-wire 12 V connector are the sole determinants of fit and electrical compatibility. Verify that the mounting holes match the 90 mm pattern and that the header supplies plain 12 V before purchase.

Poudarki

  • 90 × 25 mm frame fits standard 90 mm mounting points
  • 12 V 1.7 W draw keeps power load low
  • Under 1 600 RPM sleeve bearing runs quietly
  • 2-wire connector plugs straight into 12 V headers
  • Black non-LED design suits low-profile builds

Specifikacije

BrandZyvpee
SeriesKD1209PTS2
ModelKD1209PTS2
TypeCase Fan
Bearing TypeSleeve Bearing
RPM<1600 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions90*25MM

Vprašanja o tem izdelku

Should I pick the 90 mm or 9025 version of this Zyvpee case fan?

Both names describe the same 90×25 mm frame; there is only one physical size to choose.

What does the sub-1600 RPM figure mean once the fan is running in my case?

It caps the maximum speed at roughly 1600 revolutions per minute, so airflow and noise stay within that limit.

How does the 2-wire power connector limit control options in practice?

The two-wire design supplies fixed 12 V power without a PWM or tach signal, so speed cannot be regulated by the motherboard.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.