SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00502358BTC
Stokta
A-Tech
A-Tech 8GB DDR3L 1600 ECC SODIMM 2Rx8 1.35V
8 GB DDR3L 1600 ECC SODIMM module with 2Rx8 organisation, CL11 latency and 1.35 V low-voltage operation
- Capacity8GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- 8GB DDR3L capacity handles demanding server workloads
- 1600MHz PC3L-12800 speed accelerates data throughput
- ECC unbuffered design detects and corrects memory errors
- 35V low-voltage operation reduces power draw and heat
- 204-pin SODIMM form factor fits compatible laptop and server slots
8GB DDR3L ECC SODIMM for servers
This 8GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It uses a 204-pin SO-DIMM form factor and includes ECC error correction for data integrity. The unbuffered design fits compatible laptop or workstation slots. Major-brand chips are tested for reliable performance in demanding environments.
Suits ECC-capable DDR3L systems only
Buyers whose platforms require registered or fully buffered memory cannot use this unbuffered module. Systems limited to standard non-ECC DDR3 will not benefit from the error-correction feature. Laptops or servers that only support 1.5 V DDR3 may not accept the lower 1.35 V specification. Verify your hardware manual before ordering.
Simple slot insertion, check voltage first
Installation follows the standard SO-DIMM procedure: align the notch, insert at an angle, then press down until the clips lock. The most common issue is a motherboard that rejects 1.35 V modules or disables ECC in BIOS. Confirm the system supports DDR3L and unbuffered ECC to avoid a no-post situation.
Öne çıkanlar
- 8GB DDR3L capacity handles demanding server workloads
- 1600MHz PC3L-12800 speed accelerates data throughput
- ECC unbuffered design detects and corrects memory errors
- 35V low-voltage operation reduces power draw and heat
- 204-pin SODIMM form factor fits compatible laptop and server slots
Teknik özellikler
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Bu ürünle ilgili sorular
Does my laptop need a 204-pin DDR3L SODIMM slot to use this module?
Yes — this module uses a 204-pin DDR3L SODIMM form factor and requires a compatible slot that supports 1.35 V DDR3L 1600 (PC3L-12800) operation.
Will this ECC SODIMM work in a system that originally used non-ECC DDR3 1600 memory?
The module is an unbuffered ECC DDR3L 1600 part; it will only function if the platform’s memory controller and BIOS explicitly support ECC SODIMMs.
How can I confirm the module is running at 1600 MHz with ECC active after installation?
Check the memory details in your OS or BIOS — the speed should show 1600 MHz (PC3L-12800), voltage 1.35 V, and ECC reported as enabled or active.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
