Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 204-pin DDR3L SODIMM module with black chips

A-Tech

A-Tech 8GB DDR3L 1600 ECC SODIMM 2Rx8 1.35V

SKU CH-JG0A-CF7KQ

8 GB DDR3L 1600 ECC SODIMM module with 2Rx8 organisation, CL11 latency and 1.35 V low-voltage operation

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • 8GB DDR3L capacity handles demanding server workloads
  • 1600MHz PC3L-12800 speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible laptop and server slots

8GB DDR3L ECC SODIMM for servers

This 8GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It uses a 204-pin SO-DIMM form factor and includes ECC error correction for data integrity. The unbuffered design fits compatible laptop or workstation slots. Major-brand chips are tested for reliable performance in demanding environments.

Suits ECC-capable DDR3L systems only

Buyers whose platforms require registered or fully buffered memory cannot use this unbuffered module. Systems limited to standard non-ECC DDR3 will not benefit from the error-correction feature. Laptops or servers that only support 1.5 V DDR3 may not accept the lower 1.35 V specification. Verify your hardware manual before ordering.

Simple slot insertion, check voltage first

Installation follows the standard SO-DIMM procedure: align the notch, insert at an angle, then press down until the clips lock. The most common issue is a motherboard that rejects 1.35 V modules or disables ECC in BIOS. Confirm the system supports DDR3L and unbuffered ECC to avoid a no-post situation.

Helstu kostir

  • 8GB DDR3L capacity handles demanding server workloads
  • 1600MHz PC3L-12800 speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible laptop and server slots

Tæknilýsing

BrandA-Tech
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Spurningar um þessa vöru

Does my laptop need a 204-pin DDR3L SODIMM slot to use this module?

Yes — this module uses a 204-pin DDR3L SODIMM form factor and requires a compatible slot that supports 1.35 V DDR3L 1600 (PC3L-12800) operation.

Will this ECC SODIMM work in a system that originally used non-ECC DDR3 1600 memory?

The module is an unbuffered ECC DDR3L 1600 part; it will only function if the platform’s memory controller and BIOS explicitly support ECC SODIMMs.

How can I confirm the module is running at 1600 MHz with ECC active after installation?

Check the memory details in your OS or BIOS — the speed should show 1600 MHz (PC3L-12800), voltage 1.35 V, and ECC reported as enabled or active.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.