Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 204-pin DDR3L SODIMM module with black chips

A-Tech

A-Tech 8GB DDR3L 1600 ECC SODIMM 2Rx8 1.35V

SKU CH-JG0A-CF7KQ

8 GB DDR3L 1600 ECC SODIMM module with 2Rx8 organisation, CL11 latency and 1.35 V low-voltage operation

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • 8GB DDR3L capacity handles demanding server workloads
  • 1600MHz PC3L-12800 speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible laptop and server slots

8GB DDR3L ECC SODIMM for servers

This 8GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It uses a 204-pin SO-DIMM form factor and includes ECC error correction for data integrity. The unbuffered design fits compatible laptop or workstation slots. Major-brand chips are tested for reliable performance in demanding environments.

Suits ECC-capable DDR3L systems only

Buyers whose platforms require registered or fully buffered memory cannot use this unbuffered module. Systems limited to standard non-ECC DDR3 will not benefit from the error-correction feature. Laptops or servers that only support 1.5 V DDR3 may not accept the lower 1.35 V specification. Verify your hardware manual before ordering.

Simple slot insertion, check voltage first

Installation follows the standard SO-DIMM procedure: align the notch, insert at an angle, then press down until the clips lock. The most common issue is a motherboard that rejects 1.35 V modules or disables ECC in BIOS. Confirm the system supports DDR3L and unbuffered ECC to avoid a no-post situation.

Puncte forte

  • 8GB DDR3L capacity handles demanding server workloads
  • 1600MHz PC3L-12800 speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible laptop and server slots

Specificații

BrandA-Tech
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Întrebări despre acest articol

Does my laptop need a 204-pin DDR3L SODIMM slot to use this module?

Yes — this module uses a 204-pin DDR3L SODIMM form factor and requires a compatible slot that supports 1.35 V DDR3L 1600 (PC3L-12800) operation.

Will this ECC SODIMM work in a system that originally used non-ECC DDR3 1600 memory?

The module is an unbuffered ECC DDR3L 1600 part; it will only function if the platform’s memory controller and BIOS explicitly support ECC SODIMMs.

How can I confirm the module is running at 1600 MHz with ECC active after installation?

Check the memory details in your OS or BIOS — the speed should show 1600 MHz (PC3L-12800), voltage 1.35 V, and ECC reported as enabled or active.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.