AGI
AGI AI818-43 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
$177,99
0.00229221BTC
Stokta
AGI
AGI AI828 1TB internal SSD PCIe 4.0 x4 heatsink
A 1TB M.2 2280 drive with a heatsink, PCIe 4.0 x4 interface and sequential speeds up to 7400 MB/s read and 6700 MB/s write
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
Options AI828-1TB
- AI818-43-1TB
- AI818-43-2TB
- AI838-1TB
- AI828-2TB
- AI828-1TB
- Up to 7400 MB/s sequential read for ultra-fast load times
- Up to 6700 MB/s sequential write for rapid file transfers
- Integrated heatsink maintains performance during heavy workloads
- 3000 TBW endurance rating for long-term reliability
- 2,000,000 hours MTBF for sustained operation
AGI AI828 1TB PCIe 4.0 x4 SSD
The AGI AI828 is a 1TB internal solid-state drive built for consumer desktops and notebooks. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 interface. Sequential reads reach up to 7400 MBps while writes reach up to 6700 MBps, making it suitable for gaming, content creation and data-intensive workloads.
Integrated heatsink and NANDXtend ECC
A high-conductivity heatsink ships attached to the drive, helping to dissipate heat during sustained transfers. The controller employs NANDXtend ECC technology alongside 3D NAND to protect data integrity at high speeds. SMART and TRIM commands are supported for ongoing maintenance and consistent operation.
Check M.2 slot keying and heatsink clearance
Verify that your motherboard or laptop provides an M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4 operation. Confirm the physical space around the slot can accommodate the fitted heatsink without interfering with other components or case panels. Ensure the system BIOS is current to enable full performance.
Öne çıkanlar
- Up to 7400 MB/s sequential read for ultra-fast load times
- Up to 6700 MB/s sequential write for rapid file transfers
- Integrated heatsink maintains performance during heavy workloads
- 3000 TBW endurance rating for long-term reliability
- 2,000,000 hours MTBF for sustained operation
Teknik özellikler
| Brand | AGI |
|---|---|
| Series | AI828 |
| Model | AGI1T0G44AI828 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6700 MBps |
| Terabytes Written (TBW) | 3000TB(4TB) |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Features | ? High quality heatsink ? Speed up to 7400MB/s ? 4TB ultra-large capacity ? Support NVMe1.4 |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5% to~98%RH (Non-condensing) |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 15G |
| Height | 5.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.5g |
Bu modelin diğer sürümleri
Aynı seriden 4 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
AGI
AGI AI818-43 2TB NVMe M.2 2280 PCIe 4.0 x4 Internal SSD Graphite Heat Sink
- Internal Solid Stat…
- Consumer
$258,99
0.00333535BTC
Stokta
Bu ürünle ilgili sorular
Will the 3000 TBW endurance rating require me to replace the drive soon?
The 3000 TBW rating combined with a 2,000,000 hour MTBF indicates a long service life before any replacement is needed.
Does the 7400 MB/s read speed drop when the drive gets hot during long sessions?
The included high-conductivity heatsink manages heat to maintain performance within the 0°C to 70°C operating range.
How much power does the PCIe 4.0 x4 interface draw when the SSD runs all day?
The drive operates on standard M.2 slot power with NVMe 1.4 efficiency features like SMART and TRIM for steady operation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
