AGI AI818-43 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
AGI
A 1TB M.2 2280 drive with a heatsink, PCIe 4.0 x4 interface and sequential speeds up to 7400 MB/s read and 6700 MB/s write
Options AI828-1TB
The AGI AI828 is a 1TB internal solid-state drive built for consumer desktops and notebooks. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 interface. Sequential reads reach up to 7400 MBps while writes reach up to 6700 MBps, making it suitable for gaming, content creation and data-intensive workloads.
A high-conductivity heatsink ships attached to the drive, helping to dissipate heat during sustained transfers. The controller employs NANDXtend ECC technology alongside 3D NAND to protect data integrity at high speeds. SMART and TRIM commands are supported for ongoing maintenance and consistent operation.
Verify that your motherboard or laptop provides an M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4 operation. Confirm the physical space around the slot can accommodate the fitted heatsink without interfering with other components or case panels. Ensure the system BIOS is current to enable full performance.
| Brand | AGI |
|---|---|
| Series | AI828 |
| Model | AGI1T0G44AI828 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6700 MBps |
| Terabytes Written (TBW) | 3000TB(4TB) |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Features | ? High quality heatsink ? Speed up to 7400MB/s ? 4TB ultra-large capacity ? Support NVMe1.4 |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5% to~98%RH (Non-condensing) |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 15G |
| Height | 5.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.5g |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 3000 TBW rating combined with a 2,000,000 hour MTBF indicates a long service life before any replacement is needed.
The included high-conductivity heatsink manages heat to maintain performance within the 0°C to 70°C operating range.
The drive operates on standard M.2 slot power with NVMe 1.4 efficiency features like SMART and TRIM for steady operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?