AGI AI818-43 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
AGI
A 1TB M.2 2280 drive with a heatsink, PCIe 4.0 x4 interface and sequential speeds up to 7400 MB/s read and 6700 MB/s write
Options AI828-1TB
The AGI AI828 is a 1TB internal solid-state drive built for consumer desktops and notebooks. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 interface. Sequential reads reach up to 7400 MBps while writes reach up to 6700 MBps, making it suitable for gaming, content creation and data-intensive workloads.
A high-conductivity heatsink ships attached to the drive, helping to dissipate heat during sustained transfers. The controller employs NANDXtend ECC technology alongside 3D NAND to protect data integrity at high speeds. SMART and TRIM commands are supported for ongoing maintenance and consistent operation.
Verify that your motherboard or laptop provides an M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4 operation. Confirm the physical space around the slot can accommodate the fitted heatsink without interfering with other components or case panels. Ensure the system BIOS is current to enable full performance.
| Brand | AGI |
|---|---|
| Series | AI828 |
| Model | AGI1T0G44AI828 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6700 MBps |
| Terabytes Written (TBW) | 3000TB(4TB) |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Features | ? High quality heatsink ? Speed up to 7400MB/s ? 4TB ultra-large capacity ? Support NVMe1.4 |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5% to~98%RH (Non-condensing) |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 15G |
| Height | 5.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.5g |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The 3000 TBW rating combined with a 2,000,000 hour MTBF indicates a long service life before any replacement is needed.
The included high-conductivity heatsink manages heat to maintain performance within the 0°C to 70°C operating range.
The drive operates on standard M.2 slot power with NVMe 1.4 efficiency features like SMART and TRIM for steady operation.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?