AGI AI818-43 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
AGI
A 1TB M.2 2280 drive with a heatsink, PCIe 4.0 x4 interface and sequential speeds up to 7400 MB/s read and 6700 MB/s write
Options AI828-1TB
The AGI AI828 is a 1TB internal solid-state drive built for consumer desktops and notebooks. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 interface. Sequential reads reach up to 7400 MBps while writes reach up to 6700 MBps, making it suitable for gaming, content creation and data-intensive workloads.
A high-conductivity heatsink ships attached to the drive, helping to dissipate heat during sustained transfers. The controller employs NANDXtend ECC technology alongside 3D NAND to protect data integrity at high speeds. SMART and TRIM commands are supported for ongoing maintenance and consistent operation.
Verify that your motherboard or laptop provides an M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4 operation. Confirm the physical space around the slot can accommodate the fitted heatsink without interfering with other components or case panels. Ensure the system BIOS is current to enable full performance.
| Brand | AGI |
|---|---|
| Series | AI828 |
| Model | AGI1T0G44AI828 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6700 MBps |
| Terabytes Written (TBW) | 3000TB(4TB) |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Features | ? High quality heatsink ? Speed up to 7400MB/s ? 4TB ultra-large capacity ? Support NVMe1.4 |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5% to~98%RH (Non-condensing) |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 15G |
| Height | 5.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.5g |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The 3000 TBW rating combined with a 2,000,000 hour MTBF indicates a long service life before any replacement is needed.
The included high-conductivity heatsink manages heat to maintain performance within the 0°C to 70°C operating range.
The drive operates on standard M.2 slot power with NVMe 1.4 efficiency features like SMART and TRIM for steady operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟