Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

Alphacool

Alphacool AlphaTube HF Tubing 10/13mm 1m UV White PVC

SKU CH-5VFY-DQ36Q

UV-reactive white PVC tubing with 10 mm inner and 13 mm outer diameter, rated for 80 °C and 2 bar working pressure

  • TypeTubing

Length 1m

Color UV White

  • UV White glows under UV light for striking aesthetics
  • 10 mm inner diameter and 13 mm outer diameter fit standard 3/8" ID and 1/2" OD fittings
  • Flexible PVC with 65-70 A-Shore hardness bends easily without kinking
  • Rated for -10 °C to 80 °C working temperature range
  • 1 metre length suits compact or custom loop layouts

Tubing for Custom Water-Cooling Loops

This PVC tubing connects pumps, radiators, blocks and reservoirs in a custom liquid-cooling loop. The 10 mm inner diameter and 13 mm outer diameter fit standard G1/4 fittings. A 65–70 A-Shore hardness keeps the tube flexible for routing yet stiff enough to resist kinking on tight bends. One metre length suits most single-loop builds.

Replaces Worn or Mismatched Tubing

Swap out aged, discoloured or incorrectly sized hose when rebuilding or expanding a loop. The upgrade is worth it when the old tubing has lost plasticiser, shows clouding or cannot meet the 2 bar working pressure and 8 bar burst rating. UV White colour also changes the loop aesthetic without new components.

Handles Standard Loop Pressures and Temperatures

Rated for continuous use between –10 °C and 80 °C at up to 2 bar working pressure with an 8 bar burst margin. Comfortably feeds typical single-pump configurations and common radiator counts. Runs out of headroom in multi-pump serial setups or extreme sub-ambient chillers that exceed the temperature or pressure envelope.

Öne çıkanlar

  • UV White glows under UV light for striking aesthetics
  • 10 mm inner diameter and 13 mm outer diameter fit standard 3/8" ID and 1/2" OD fittings
  • Flexible PVC with 65-70 A-Shore hardness bends easily without kinking
  • Rated for -10 °C to 80 °C working temperature range
  • 1 metre length suits compact or custom loop layouts

Teknik özellikler

TypeTubing

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

What fitting sizes match the 10 mm inner and 13 mm outer diameter of this tubing?

Use compression fittings rated for 10 mm ID and 13 mm OD, or 3/8 inch ID and 1/2 inch OD barbs with matching clamps.

How do I install the tubing without kinking it during tight bends?

Warm the PVC gently with warm water, push it fully onto the fitting until it seats against the collar, and avoid bending sharper than the tubing's natural curve.

When should I plan to replace this tubing in a loop running near the 80 °C limit?

Inspect every six to twelve months; replace if the material yellows, stiffens beyond the 65-70 A-Shore range, or shows micro-cracks near fittings.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.