SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00502017BTC
Stokta
EN-Labs
EN-Labs PCIEU3A2CS USB 3.1 Gen 1 Type-C + 2 Type-A PCIe expansion card, SATA power
Adds one USB-C and two USB-A ports at 5 Gbit/s through a PCIe slot using a VIA VL805 chipset with SATA power
- FeaturesFeatures: Add 3 USB 3.0 ports(1 x USB Type-C+2 x Type A + 20
- Add three USB 3.1 Gen 1 ports via a single PCI Express x1 slot
- USB Type-C and two Type-A connectors reach 5 Gbit/s transfer rates
- VIA VL805 chipset handles SuperSpeed USB 3.1 Gen 1 and legacy USB 2.0/1.1
- SATA 15-pin power connector supplies stable current for connected devices
- Full-profile bracket fits standard desktop cases and supports x1, x4, x8, x16 slots
PCIe USB 3.1 Gen 1 expansion card
The EN-Labs PCIEU3A2CS adds one USB Type-C and two USB Type-A ports to a desktop through a PCI Express x1 slot. It uses the VIA VL805 chipset and supports the USB 3.1 Gen 1 standard at up to 5Gbps. The card is backward compatible with USB 2.0 and USB 1.1 devices.
Build integration: slot and power
The card fits PCIe x1, x4, x8 or x16 slots and includes a full-profile bracket for standard cases. It draws auxiliary power from a SATA 15-pin connector, so a free SATA power lead from the PSU is required. A 20-pin internal header is also present on the board.
Thermals, noise and power draw
The controller runs without a dedicated fan, relying on case airflow for passive cooling. Power consumption is limited to what the SATA connector supplies, adding minimal load to the PSU. Silent operation is maintained because there are no moving parts on the card.
Öne çıkanlar
- Add three USB 3.1 Gen 1 ports via a single PCI Express x1 slot
- USB Type-C and two Type-A connectors reach 5 Gbit/s transfer rates
- VIA VL805 chipset handles SuperSpeed USB 3.1 Gen 1 and legacy USB 2.0/1.1
- SATA 15-pin power connector supplies stable current for connected devices
- Full-profile bracket fits standard desktop cases and supports x1, x4, x8, x16 slots
Teknik özellikler
| Brand | En-Labs |
|---|---|
| Model | PCIEU3A2CS |
| Features | Features: Add 3 USB 3.0 ports(1 x USB Type-C+2 x Type A + 20 Pin Interna) through a PCI Express slot Compatible with PCI-Express 2.0 stardard Compatible with Super Speed USB 3.1 GEN 1(5Gbps) stardard,backwards to USB 2.0 and USB 1.1 Chip set :VIA VL805 Maximum transfer speed : 5Gbps Power by SATA 15pin Supports PCIe 1x, 4x, 8x, 16x Slot Support Windows XP / 2003 / Win7 / Win8 / Vista / Linux Interface: Bus Type:PCI Express Type Standard:Profile (LP bracket incl.) Chipset:VIA VL805 Interface: USB 3.1 GEN 1 Port Type and Rate :USB 3.0 - 5 Gbit/s Connector Type(s): 1 - PCI Express x1 Ma |
Bu ürünle ilgili sorular
Does the VIA VL805 chipset cap sustained transfers at the 5 Gbit/s Gen 1 ceiling?
Yes, the VL805 controller is rated for USB 3.1 Gen 1 at 5 Gbit/s, so sustained throughput cannot exceed that limit.
Will the card draw enough power through the SATA 15-pin connector to keep all three ports running cool under all-day load?
The SATA 15-pin feed supplies the extra current the VL805 needs, keeping port power stable and heat low during continuous use.
Must the motherboard have a free PCI Express x1 slot and a spare SATA power lead for this card to work?
Yes, it installs in any PCIe x1, x4, x8 or x16 slot and requires one SATA 15-pin power connector from the PSU.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
